Safety Instructions

Use only with the cart, stand, tripod, bracket,

9 or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

10	Never touch this apparatus or antenna during
	a thunder or lighting storm.

11	Do not allow a impact shock or any objects to
	fall into the product, and do not drop onto the
	screen with something.

12	Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

Outdoor use marking :

WARNING - To reduce the risk of fire or elec- tric shock, do not expose this appliance to rain or moisture.

Wet Location Marking : Apparatus shall not be

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped.

15 exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on or over apparatus.

GROUNDING

13 CAUTION concerning the Power Cord :

Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates dam- age or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced

Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.

Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.

Power

Supply

Short-circuit

Breaker

17 DISCONNECTING POWER:

Power is supplied to the Link-Loader if the power cord is connected. Unplug power cord from AC power outlet to remove power.