INSTALLATION MENU
| 05. Start Volume | |
| ||
| This function allows the Installer to determine the initial volume | |
INSTALLATION | ||
level setting when the TV is turned ON. This feature is useful | ||
Setting is retained in | ||
| for an | |
| select that Volume level when it is turned on. The range of values | |
| are 0 - 63, 255. If 255 is selected, the current volume level will | |
| be retained in memory when the TV is turned Off. At TV turn | |
| On, Volume level is automatically set to the previous level. | |
MENU | 06. Power Management | |
| ||
| Determines hours of no activity before automatic shutoff. The | |
| POWER MANAGE function is for saving energy. If set to No, | |
| Power Manage is disabled. Settings range from 1 ~ 7, repre- | |
| senting the hours that the unit will remain On, unless there has | |
| been activity from either the control panel or remote control. | |
| Setting is retained in | |
| 07. Key Management | |
| If set to 1, key defeat prevents the end user from accessing the | |
| ||
| and F or G button do not function. If set to 0, those keys do | |
| function. | |
| Note: The menus can always be accessed by pressing MENU | |
| button on the remote. | |
| Key management when enabled determines the level of control | |
| that the guest has over the television. Key management has | |
| four modes: (default is ‘0’) | |
| 0 = Television is unrestricted and responds to all commands. | |
| 1 = Key defeat ”prevents the television from responding | |
| to “MENU”key presses on the front panel. | |
| 2 = “Key Lock ”prevents the television from responding to | |
| any front panel key press. | |
| 3 = “System provider ”mode allows access to the menu | |
| system from the front panel or remote control but | |
| access is controlled as follows |
*TV Guide if equipped – no access
*“Setup” – only access to main/pip input select screens
*“Video” – no access
*“Audio” – no access
*“Time” – only access to sleep timer
*“Option”– only access to aspect ratio, closed caption, SimpLink
*“Lock” – full access
Setting is retained in non-volatile memory.
08.Factory Reset Set to 0 for normal.
Set to 1 to load presets to all of the previous item settings and exit menu.
WARNING: Setting this to 1 will reload the factory defaults. Setting is retained in
09. Aspect Ratio
Selects default aspect ratio at power up, see settings below. Set to 0 to disable. Aspect Ratio will stay at previous state. Set to 1 “Set By Program”.
Set to 2 for 4:3.
Set to 3 for 16:9 (Factory Default).
Setting is retained in
Item | Enable | Disable | Initial |
| Yes | No | No |
Public Display Mode | |||
Start Channel | Yes | No | No |
Ch. Type | TV/CATV/DTV/CADTV | TV | |
Major No. | Subject to Ch. Type | 2 | |
Minor No. | Subject to Ch. Type | 0 | |
Minimum Volume | 0 | ~ 100 | 0 |
Maximum Volume | 0 | ~ 100 | 100 |
Start Volume | Yes | No | No |
Level | 0 | ~ 100 |
|
Power Management | Yes | No | No |
Setting | 1 | ~ 7 | 1 |
Key Management | 0 | ~ 3 | 0 |
Factory Reset | 0 | ~ 1 | 0 |
Aspect Ratio | 0 | ~ 3 | 0 |
8