Loewe 32, 42, 37 operating instructions Connecting audio amplifiers, Mark the HiFi/AV amplifier

Operating additional equipment

Connecting audio amplifiers

The sound component wizard permits configuration of different audio amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with different digital audio formats (Dolby Digital, dts, MPEG, and stereo/PCM). See the operating manual for the audio amplifier for more information.

Call TV menu.

Select Connections,

go to the menu line below.

Select Sound components.

OK calls the sound components wizard.

Mark the HiFi/AV amplifier.

Sound components

Sound playback via ...

TV speakers

TV speakers + active subwoofer
Active speakers
HiFi/AV amplifier	OK
Sound projector	END
Sound projector or TV speakers (swichable)
OK Proceed

OK continue.

Select whether the sound is to be transmitted digitally or analogue to the the amplifier.

Continue, depending on the amplifier, see right column.

Explanations of the setting possibilities:

HiFi/AV	Select the setting when an amplifier is connected and the
amplifier	TV speakers are not used.
	Playback can be switched between TV speakers and
	amplifiers in the sound menu after logging in a hi-fi
	amplifier under Sound via....
Sound formats	Specify sound formats which can be decoded with the
	digital amplifier (see operating manual of the used ampli-
	fier).
Type of	Select either stereo or surround amplifier.
amplifier
TV loudsp. as	For every connected surround amplifier, select whether the
centre speaker	TV speakers are to be used as centre speakers.
	If so, make a connection between the centre output of
	the amplifier and the centre input of the TV set AUDIO
	IN1 C with a cinch cable.
	Attention: Do not use the centre speaker connection of
	the amplifier, use the centre pre-amp output instead!

Connecting digital audio amplifiers

Continuation of the left column above ...

For digital audio transmission: Select yes.

Connect the digital audio output of the TV set AUDIO DIGITAL OUT with the digital audio input of the amplifier via a cinch cable:

			AUDIO DIGITAL OUT		TV set
	PREOUT		AUX1 IN AUX OUT AUX 2
FL	C	FR
			L	L
				DIGITAL
				IN
				DIGITAL
				OUT
SL	SUB	SR	R	R

Digital amplifier

Set sound formats, amplifier type and other settings, see explanations of the setting possibilities (left hand column).

Connecting analogue audio amplifiers

Continuation of the left column above ...

For digital audio transmission: Select no.

Connect the analogue audio output of the TV device AUDIO OUT L/R via a stereo cinch cable to the analogue audio input of the amplifier:

TV set

AUDIO OUT L/R

PREOUT

AUX1 IN AUX OUT AUX 2

FL	C	FR	L	L
				DIGITAL
				IN
				DIGITAL
				OUT
SL	SUB	SR	R	R

Analogue amplifier

Select amplifier type and other settings, see explanations of the setting possibilities (left hand column).

- 42