Select one of the 1~8 square buttons to select an input for each 1~5 output. The left side pane shows the input status for each output.
3.If “Assign IP” is displayed the device was not assigned an IP address automatically. Double click on “Assign IP” to manually assign an IP address for the matrix.
Select “OK” to assign the new IP address. Next select “Search” and then “Read De- vice” to display the matrix name.
RS232
9.1. RS232 Control
Baud Rate: 9600 bps Data bits: 8 bits
Parity: None
Stop bits: 1 bit
Flow control: None
Toll free: | 10 | www.atlona.com |
Local: |