Assembly

STEP 1. Attach feed support to the backup support. See Figures 1 & 2. Make sure spring is locked into place.

Feed Support

Spring

Feed Support

E-Clip

After inserting pin, swing long part of spring up into the feed support and snap into place under cable clip.

Coax Downlead from LNBF

E-Clip

Spring

Backup Support

FIGURE 1

STEP 2. Remove the two top bolts from the backup support and attach the elevation assembly to antenna. See Figure 3. Tighten bolts securely.

FIGURE 3

Backup Support

FIGURE 2

Slide elevation assembly into place

Elevation Assembly

Backup Support