Main

•TCP/IP Settings:• configure the TCP/IP settings such as Host Name, Domain Name, IP address, TCP port, network mask, Gateway, DNS, etc.. DHCP mode can also be enabled.

•Date and Time:• Set the current date and time. You can sync the Broadcaster’s time with the computer time and specify two NTP time servers to synchronize with.

•Rescan Network (F5):• Redetects all hardware on the network.

•Update Receivers and Splitters:• Update the firmware on the Receivers using the resident software/firmware on the Broadcaster.

•Default Network Tree:• Clears all the monitor listings and resets all of the labels to their default values, then proceeds to do a network rescan.

•Redraw Network Tree (F6):• Refresh the main window view.

Log

•Log (F7):• Will record the client access IP and also the important system messages and error messages.

Groups

•New Group:• Sets up a new Group of Monitors. To join monitors to a group, you need first checkmark them in the main window.

•List of Groups:• Gives a listing of all Groups available.

•Send Command to Checked Monitors:• Send commands such as Video ON/OFF, Audio ON/OFF and also the audio volume adjustment command to the Monitor itself via RS-232 interface. Also you can set the serial connection parameters on the Receiver side.

Users

•New User:• Set up a new user account.

•Edit User:• Edit a user account.

Instruction Manual