Pioneer P4500MP operation manual DIN Rear-mount

Page 50

DIN Rear-mount

Installation using the screw holes on the side of the unit

1. Remove the frame. (Fig. 7)

Frame

Insert the release pin into the hole in the bottom of the frame and pull out to remove the frame.

(When reattaching the frame, point the side with a groove downwards and attach it.)

Fig. 7

2.Fastening the unit to the factory radio mounting bracket. (Fig. 8) (Fig. 9)

Select a position where the screw holes of the bracket and the screw holes of the head unit become aligned (are fitted), and tighten the screws at 2 places on each side. Use either truss screws (5 8 mm) or flush surface screws

(5 9 mm), depending on the shape of the screw holes in the bracket.

10

Fig. 8

Screw

Dashboard or Console

Factory radio mounting bracket

Fig. 9

Image 50
Contents Page Page Page We Want You Listening For a Lifetime Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page 3 4 Level dB =2N Q=2W Center frequency Frequency Hz Page Page Page Page Page Page Page Page Page Page Page Page Installation Manual Connecting the Units English Installation Removing the Unit Fig DIN Rear-mount Fixing the Front Panel Page Page Page