Pioneer P3370XM Display the ID Code Radio ID, Messages, Channel Number Select mode

Page 25

Display the ID Code (RADIO ID)

Each XM tuner is identified with a unique Radio ID. You will need the Radio ID when activating XM service or when reporting a problem. How to display the ID Code depends on the Channel Select mode.

7Channel Number Select mode

If you select “CH 00”, the ID Code is displayed.

•Select the Channel Number zero (CH 00) with the 2/3 buttons.

7Channel Category Select mode

“RADIO ID” is provided as a Channel Category for displaying the ID Code.

•Select the Channel Category “RADIO ID” with the 5/∞ buttons.

Note:

•If you select another Channel, display of the ID Code is canceled.

•Display of the ID Code repeats displaying “RADIO ID” and the ID Code one after the other.

Messages

When problems occur with XM tuner, a message appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action.

Message	Possible cause	Recommended action
ANTENNA	The XM antenna is	Check whether the XM antenna cable
	not connected.	is attached securely.

	A short-circuit occurring in	Make sure that there is nothing unusual
	the antenna or the surrounding	with the antenna or antenna cable.
	antenna cable.

UPDATING	Radio is being updated with	Wait until encryption code is being
	latest encryption code.	updated. Channels 00 and 01 should
		function normally.

NOSIGNAL	XM signal is too weak at the	Wait until the car reaches a location
	current location.	with a stronger signal.

LOADING	Unit is acquiring audio or	Wait until the unit has received the
	program information.	information.

OFF AIR	The channel currently selected	Select another channel.
	has stopped broadcasting.

– – – – – – – –	The user has selected a Channel	Automatically switches to Channel 01.
	Number that does not exist or is
	not subscribed to.

– – – –	There is no artist name/feature,	No action needed.
	song/program title, or additional
	information associated with the
	channel at that time.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

24

Image 25

Contents DEH-P3370XM Contents Detaching and Replacing Audio AdjustmentWe Want You Listening For a Lifetime Volume Remote Controller CD-R600Key Finder Head UnitResetting the Unit Before Using This ProductAbout This Product About This ManualAfter-sales Service for Pioneer Products PrecautionWhen using the 50-Disc Type Multi-CD Player Pioneer Electronics Service, IncAbout the XM Mark Introducing XM Satellite Radio How to SubscribeBasic Operation Raise or lower the volumeTo Listen to Music Select the desired source. e.g. TunerFrequency Indicator Band Indicator Preset Number Indicator Manual and Seek TuningBasic Operation of Tuner BandBasic Operation of XM Tuner Band Preset TuningSelecting the Channel by Channel Number Select a desired channel with the 2/3 buttonTrack Number Indicator Switching the DisplayBasic Operation of Built-in CD Player OpenEject CD Loading SlotDisc Number Search for 6-Disc, 12-Disc types Basic Operation of Multi-CD PlayerThis product can control a Multi-CD player sold separately Corresponding Display Indications and Buttons 7Head Unit 7Remote Controller 7DisplayEntering the Function Menu Cancel the Function MenuOperate a mode. e.g. Repeat Play 7Tuner Function Menu Functions7XM Tuner 7Multi-CD Player 7Built-in CD PlayerEnter the Detailed Setting Menu Entering the Detailed Setting MenuOperate a mode Cancel the Detailed Setting Menu Detailed Setting Menu Functions 7PGM PGM Button Functions Tuner Operation Local Seek Tuning Local Best Stations Memory BSM BSM function stores stations in memory automaticallyXM Tuner Operation Switching the DisplaySelecting the Channel in the Channel Category Switching the Channel Select ModeChannel Category Select mode Channel Number Select modeDisplay the ID Code Radio ID MessagesRepeat Play Repeat Using the Built-in CD PlayerRandom Play Random Repeat Play plays the same track repeatedlyPause Pause Scan Play T-SCANDisc Title Input Title Pause temporarily stops the currently playing trackMulti-CD player Repeat = One- track Repeat = Disc Repeat Using Multi-CD PlayersDscn Scan Play ScanScan ITS Programming ITS ITS Instant Track SelectionITS Play ITS-P Erase a Disc Program Erase a Track ProgramDisc Title Select letters, numbers Symbols with the 5/∞ buttonsTo insert a space, select the flashing cursor Selecting Discs by Disc Title List Title List Switch the Disc Title Display with the Display buttonDisplaying Disc Title Play the selected disc with ButtonCompression and DBE Comp COMP/DBE ON/OFF SwitchingCD Text Function for CD Text compatible type Title Display SwitchingTitle Scroll Select the desired title display With the Display buttonSetting the Sound Focus Equalizer Sfeq Audio AdjustmentSelect the desired Sfeq mode About the Sound Focus Equalizer SfeqSelecting the Equalizer Curve You can switch between Equalizer curvesAbout the Custom Curves Select the desired Equalizer curveSelect the desired mode in the Audio Menu Balance Adjustment FaderOperate a mode Cancel the Audio Menu Entering the Audio MenuAdjust left/right speaker bal- ance with the 2/3 buttons Equalizer Curve Adjustment EQ-LOW/EQ-MID/EQ-HIGHBoost or attenuate the selected band with the 5/∞ buttons EQ-LOW low += EQ-MID mid += EQ-HIGH highSelect the desired Q factor with the 5/∞ buttons Equalizer Curve Fine Adjustment2N += 1N += 1W += 2W Treble Adjustment TRE Bass Adjustment BassBoost or attenuate the bass level with the 5/∞ buttons Boost or attenuate the treble level with the 5/∞ buttonsSubwoofer Output SUB.W Loudness Adjustment LoudSelect the desired level with the 2/3 buttons LOW low += MID mid += HI highSource Level Adjustment SLA Subwoofer Setting Adjustment 80HZDisplay shows +4 Theft Protection Detaching and Replacing the Front PanelDetaching the Front Panel Replacing the Front PanelEntering the Initial Setting Menu Initial SettingTurn the source OFF Enter the Initial Setting Menu Select a desired modeSetting the Time Initial Setting Menu FunctionsSetting the Warning Tone Warn Switching the AUX Mode AUXSetting the Rear Output FRT+REAR Setting the Dimmer DimmerOther Functions Using the AUX SourceDisplaying the Time Selecting the AUX SourceEnglish Español CD Player and CareError Built-in CD Player’s Error MessageHeat Specifications Pioneer Corporation