| Section |
Operating this unit | 02 |
|
|
#If the difference between the ring volume and caller’s voice volume is big, overall volume level may become unstable.
#Before disconnecting the cellular phone from this unit, make sure to adjust the volume to a proper level. If the volume is muted (zero level) on your cellular phone, the volume level of your cel- lular phone remains muted even after the cellular phone is disconnected.
Notes
!The equalizer curve for the phone source is fixed.
!When selecting the phone source, you can only operate FADER (balance adjustment) in the audio menu.
!When selecting the phone source, the fader value is set to FADER :F15 as an initial setting.
Introduction of connection and registration
!BT HANDS FREE (new phone)
!DELETE PHONE (delete phone)
If the phone is connected but not paired The following functions can be operated.
!SET PHONE (phone registration)
!DISCONNECT PHONE (disconnect phone)
!DELETE PHONE (delete phone)
If the phone is connected and paired The following functions can be operated.
!DISCONNECT PHONE (disconnect phone)
!DELETE PHONE (delete phone)
Notes
!The device name is set to PIONEER FLAP BT as default. You can change the device name in the initial setting. Refer to Editing device name on page 49.
!PIN code is set to 0000 as the default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wire- less connection on page 48.
Operating this unit
1Press
2Use
CONNECTION.
The connection menu is displayed.
Turn to change the menu option. Press to se-
lect.
# You can also select this menu by pressing and holding PHONE//CONNECT on the ordinary display.
3Turn
PAIRED PHONE (paired phone)—
BT HANDS FREE (new
If the phone is not connected and not paired
The following function can be operated.
!BT HANDS FREE (new phone)
If the phone is not connected but paired The following functions can be operated.
!PAIRED PHONE (pair phone manually)
Connecting and disconnecting a cellular phone
Using a cellular phone to initiate a connection
1 Display the connection menu.
Refer to Introduction of connection and regis- tration on this page.
2Use
BT HANDS FREE.
3Use
NOKIA
# Normally select STANDARD. If the device of
Nokia is not paired to this unit, select NOKIA.
# Push
4Press
PAIRE FROM PHONE.
Push
En 29