Pioneer DEH-P700BT operation manual Initial Settings Adjusting initial settings, Setting the date

Section
04		Initial Settings
	Adjusting initial settings		4 Push MULTI-CONTROL up or down to
	1 Press SRC and hold until the unit turns		set the date.
			Pushing MULTI-CONTROL up will increase
	off.
			the selected day, month or year. Pushing
	2 Press MULTI-CONTROL and hold until		MULTI-CONTROL down will decrease the se-
			lected day, month or year.
	the initial setting menu appears in the dis-
	play.

3Turn MULTI-CONTROL to select one of the initial settings.

CLNDR (calendar)—CLOCK (clock)— WARNING (warning tone)—AUX1 (auxiliary input 1)—AUX2 (auxiliary input 2)—REAR SP (rear output and subwoofer controller)—TEL (telephone muting/attenuation)— BUILT-IN AMP (power amp setting)— EVERSCROLL (ever scroll)—BT AUDIO (Blue- tooth audio)—PIN CODE INPUT (pin code input)—EDIT DEVICE NAME (device name edit)—BT INFO (Bluetooth version informa- tion)—BT RESET:MEMORY (Bluetooth reset)

—SOFTWARE UPDATE (software update)

# You can also select the function by pressing

FUNCTION on the remote control.

# To cancel initial settings, press BAND/ESC.

Setting the date

The calender display adjusted in this mode ap- pears when the telephone source is selected or sources and the feature demo are off.

1 Display the initial setting menu.

Refer to Adjusting initial settings on this page.

2Use MULTI-CONTROL to select CLNDR. CLNDR appears in the display.

3Push MULTI-CONTROL left or right to select the segment of the calendar display you wish to set.

Day—Month—Year

As you select segments of the calendar dis- play the segment selected will blink.

Setting the clock

Use these instructions to set the clock.

1 Display the initial setting menu.

Refer to Adjusting initial settings on this page.

2Use MULTI-CONTROL to select CLOCK.

3Push MULTI-CONTROL left or right to select the segment of the clock display you wish to set.

Hour—Minute

As you select segments of the clock display, the selected segment blinks.

4Push MULTI-CONTROL up or down to put a clock right.

Note

You can match the clock to a time signal by pressing MULTI-CONTROL.

!If 00 to 29, the minutes are rounded down. (e.g., 10:18 becomes 10:00.)

!If 30 to 59, the minutes are rounded up. (e.g., 10:36 becomes 11:00.)

Switching the warning tone

If the front panel is not detached from the head unit within four seconds of turning off the ignition, a warning tone sounds. You can turn off the warning tone.

1 Display the initial setting menu.

Refer to Adjusting initial settings on this page.

2Use MULTI-CONTROL to select

WARNING.

46 En