SERVICE AND ADJUSTMENTS

TRANSAXLE GEAR SHIFT LEVER NEUTRAL ADJUSTMENT (See Fig. 22)

The transaxle should be in neutral when the gear shift lever is in neutral (lock gate) position. The adjustment is preset at the factory; however, if adjustment is needed, proceed as follows:

•Make sure transaxle is in neutral.

NOTE: When the tractor rear wheels move freely, the transaxle is in neutral.

•Loosen adjustment bolt in front of the right rear wheel.

•Position the gear shift lever in the neutral position.

•Tighten adjustment bolt securely.

NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position.

 

NEUTRAL

GEARSHIFT LEVER

LOCK GATE

 

 

ADJUSTMENT

 

BOLT

Fig. 22

TO ADJUST STEERING WHEEL ALIGNMENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

Your new tractor front wheel toe-in and camber is set at the factory and is normal. The front wheel toe-in and camber are not adjustable. If damage has occurred to affect the factory set front wheel toe-in or camber, contact a qualified service center.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 23)

RETAINING WASHERS

RING

AXLE

COVER

SQUARE KEY (REAR

WHEEL ONLY)

Fig. 23

TO START ENGINE WITH A WEAK BATTERY (See Fig. 24)

WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the Maintenance section of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

•Connect one end of the RED cable to the POSITIVE

(+)terminal of each battery(A-B), taking care not to short against tractor chassis.

•Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

•Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

•BLACK cable first from chassis and then from the fully charged battery.

•RED cable last from both batteries.

•Block up axle securely.

•Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

•Repair tire and reassemble.

•On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

•Replace washers and snap retaining ring securely in axle groove.

•Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local

WEAK OR DEAD BATTERY

FULLY CHARGED

BATTERY

parts dealer. Tire sealant also prevents tire dry rot and corrosion.

Fig. 24

21

Page 20 Page 22
Page 21
Image 21
McCulloch 96012010300, MC13538LT Transaxle Gear Shift Lever Neutral Adjustment See Fig, To Adjust Steering Wheel Alignment
Page 20 Page 22

96012010300, MC13538LT specifications

The McCulloch MC13538LT is a robust lawn tractor designed for both residential and semi-commercial use, making it an essential tool for anyone looking to maintain their lawn with ease and efficiency. This model combines powerful performance with innovative technology to deliver an outstanding mowing experience.

One of the standout features of the MC13538LT is its reliable 420cc engine, which provides ample power and torque to tackle various mowing tasks. The engine is designed to ensure smooth operation, reducing vibration and noise, making it comfortable for extended use. The automatic transmission further enhances user experience by allowing seamless gear changes, ensuring that operators can focus on mowing without the hassle of manual shifting.

The McCulloch MC13538LT features a 38-inch cutting deck made of durable steel. This size is ideal for maneuvering around obstacles in the yard while still providing efficient cutting coverage. The deck can be adjusted to various cutting heights, allowing users to choose the perfect length for their grass, catering to different seasonal needs or aesthetic preferences.

Another notable aspect is the bicycle-style handlebar, which adds to the ergonomic design of the tractor. This feature allows for enhanced control and comfort throughout the mowing process. The grass collector bag, designed for easy removal and emptying, helps keep the lawn tidy and reduces the hassle of manual raking.

Moreover, the MC13538LT incorporates advanced technologies such as the mulch feature. This allows the cut grass to be finely chopped and returned to the lawn, promoting nutrient recycling and soil health. The model also integrates safety features like an automatic engine shut-off when the driver leaves the seat, underscoring McCulloch’s commitment to user safety.

With its combination of power, comfort, and innovative features, the McCulloch MC13538LT is a top choice for homeowners seeking a reliable lawn tractor. Whether tackling small or large yards, this machine delivers impressive performance that helps maintain a neat and healthy lawn throughout the seasons.
Top Page Image Contents