OPERATION

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

•Check engine oil with tractor on level ground.

•Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, remove and read oil level. If necessary, add oil until “FULL” mark on dipstick is reached. Do not overfill.

•For cold weather operation you should change oil for easier starting (See “OIL VISCOSITY CHART” in the Maintenance section of this manual).

•To change engine oil, see the Maintenance section in this manual.

ADD GASOLINE

•Fill fuel tank to bottom of filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness.

CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

IMPORTANT: WHEN OPERATING IN TEMPERATURES BELOW 32°F (0°C), USE FRESH, CLEAN WINTER GRADE GASOLINE TO HELP ENSURE GOOD COLD WEATHER STARTING.

CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract mois- ture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

TO START ENGINE (See Fig. 4)

When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine.

•Sit on seat in operating position, depress clutch/brake pedal and set parking brake.

•Place gear shift lever in neutral position.

•Move attachment clutch to “DISENGAGED” position.

•Move throttle control to choke position.

NOTE: Before starting, read the warm and cold starting procedures below.

•Insert key into ignition and turn key clockwise to “START” position and release key as soon as engine starts. Do not run starter continuously for more than fifteen seconds per minute. If the engine does not start after several attempts, move throttle control to fast position, wait a few minutes and try again. If engine still does not start, move the throttle control back to the choke position and retry.

WARM WEATHER STARTING (50°F/10°C and above)

•When engine starts, move the throttle control to the fast position.

•The attachments and ground drive can now be used. If the engine does not accept the load, restart the engine and allow it to warm up for one minute using the choke as described above.

COLD WEATHER STARTING (50°F/10°C and below)

•When engine starts, allow engine to run with the throttle control in the choke position until the engine runs roughly, then move throttle control to fast posi- tion. This may require an engine warm-up period from several seconds to several minutes, depending on the temperature.

•The attachments can also be used during the engine warm-up period.

NOTE: If at a high altitude (above 3000 feet) or in cold temperatures (below 32° F /0°C) the carburetor fuel mixture may need to be adjusted for best engine performance. See “TO ADJUST CARBURETOR” in the Service and Adjust- ments section of this manual.

12

Page 11 Page 13
Page 12
Image 12
McCulloch MC13538LT, 96012010300 Before Starting the Engine, Check Engine OIL Level, ADD Gasoline, To Start Engine See Fig
Page 11 Page 13

96012010300, MC13538LT specifications

The McCulloch MC13538LT is a robust lawn tractor designed for both residential and semi-commercial use, making it an essential tool for anyone looking to maintain their lawn with ease and efficiency. This model combines powerful performance with innovative technology to deliver an outstanding mowing experience.

One of the standout features of the MC13538LT is its reliable 420cc engine, which provides ample power and torque to tackle various mowing tasks. The engine is designed to ensure smooth operation, reducing vibration and noise, making it comfortable for extended use. The automatic transmission further enhances user experience by allowing seamless gear changes, ensuring that operators can focus on mowing without the hassle of manual shifting.

The McCulloch MC13538LT features a 38-inch cutting deck made of durable steel. This size is ideal for maneuvering around obstacles in the yard while still providing efficient cutting coverage. The deck can be adjusted to various cutting heights, allowing users to choose the perfect length for their grass, catering to different seasonal needs or aesthetic preferences.

Another notable aspect is the bicycle-style handlebar, which adds to the ergonomic design of the tractor. This feature allows for enhanced control and comfort throughout the mowing process. The grass collector bag, designed for easy removal and emptying, helps keep the lawn tidy and reduces the hassle of manual raking.

Moreover, the MC13538LT incorporates advanced technologies such as the mulch feature. This allows the cut grass to be finely chopped and returned to the lawn, promoting nutrient recycling and soil health. The model also integrates safety features like an automatic engine shut-off when the driver leaves the seat, underscoring McCulloch’s commitment to user safety.

With its combination of power, comfort, and innovative features, the McCulloch MC13538LT is a top choice for homeowners seeking a reliable lawn tractor. Whether tackling small or large yards, this machine delivers impressive performance that helps maintain a neat and healthy lawn throughout the seasons.
Top Page Image Contents