Editing the Text
The SETUP menu will be displayed when MULTI KNOB is held down while the power is in “OFF” position. Turn the MULTI KNOB to select the OPENING. You can enter the character at the flashing cursor position. The character selection method is described below.
1Enter the character to PRESET1, 2 and 3. Turn the MULTI KNOB right or left to select the character, and press the RIGHT or LEFT to move the cursor.
•PRESET1: Alphabet input
•PRESET2: Number
•PRESET3: Space, Deletion
2After selecting the character, press the MULTI KNOB right. The cursor moves to the right, so you can edit the next character. (Maximum number of characters for entry is 12.)
To choose and delete the character or text, choose the character with the cursor and then press PRESET3 to delete.
3After character entry, press the MULTI KNOB to register the text string.
If the cursor is positioned on the 12th character, press the RIGHT to register the whole text entered.
New Message Display
The next time the ACC is switched on, the text edited by the user will be displayed.
NOTICE
To avoid draining the battery, do not leave the car audio on longer than necessary when the engine is not running.
51