Pioneer AVD-W6210 About the Liquid Crystal Display LCD Screen, About the Small Fluorescent Tube

Page 24

Using the Display Correctly

About the Liquid Crystal Display (LCD) Screen

•If the display is near the vent of an air conditioner when it is deployed, make sure that air from the air conditioner is not blowing on it. Heat from the heater may break the LCD screen, and cool air from the cooler may cause moisture to form inside the display resulting in possible damage. Also, if the display is cooled down by the cooler, the screen may become dark, or the life span of the small fluorescent tube used inside the display may be shortened.

•Small black dots or white dots (bright dots) may appear on the LCD screen. These are due to the characteristics of the LCD screen and do not indicate a problem with the dis- play.

•At low temperatures, the LCD screen may be dark for a while after the power is turned ON.

•The LCD screen will be difficult to see if it is exposed to direct sunlight.

Keeping the Display in Good Condition

•When removing dust from the screen or cleaning the display, first turn the system power OFF, then wipe with a soft dry cloth.

•When wiping the screen, take care not to scratch the surface. Do not use harsh or abra- sive chemical cleaners.

•Do not use a wet cloth for cleaning. Do not use organic solvents, such as benzine and thinner.

About the Small Fluorescent Tube

•A small fluorescent tube is used inside the display to illuminate the LCD screen.

*The fluorescent tube is an expendable part and has a limited service life.

*The fluorescent tube should last for approximately 10,000 hours, depending on oper- ating conditions. (Using the display at low temperatures reduces the service life of the fluorescent tube.)

*When the fluorescent tube reaches the end of its useful life, the screen will be dark and the image will no longer be projected. If this happens, consult your dealer or the nearest authorized PIONEER service facility.

23

Page 23 Page 25
Image 24
Page 23 Page 25
Contents AVD-W6210 Contents We Want You Listening For a Lifetime Important Safeguards Fitting and Removing the Display To fit the displayFit part 1 into the grooves 2 of the base Slide the display downward until it clicks into placeTo remove the display Precaution When combined with a Pioneer navigation unitAbout This Product After-sales Service for Pioneer Products Product registrationBefore Using This Product To Avoid Battery ExhaustionTo Protect the LCD Screen of the Display About the RCA Video and Audio Outputs of this UnitResetting the Microprocessor To Ensure Safe DrivingComponent Parts and Features Key FinderDisplay Unit Turn On Power Volume AdjustmentBasic Operation Selecting a Source Select the desired sourceChanging the Wide Screen Mode Wide Modes Available Operating the Setup Menu Entering the Setup MenuDisplay the setup menu Select a settingPicture Adjust Adjust the itemAdjust brightness DimmerVideo Setting Input Setting AV IN2Select a connection mode Confirm the safety and get into reverse gear PolarityPicture Adjust Switching the image of rear displayAudio Setting Setting the Mixing of the Guidance Voice GuideUsing the Display Correctly Handling the DisplayAbout the Liquid Crystal Display LCD Screen Keeping the Display in Good ConditionAbout the Small Fluorescent Tube Connecting the System Cords that have the same function Names and Functions of Connection Terminals Hide-away UnitConnecting the Power Cable Connection Diagram Video input AV IN1 Input AV IN2 InputConnection Diagram 26-pin input You can connect a separately sold Pioneer Navigation unitConnecting the RCA Audio and Video Output EnglishConnecting REVERSE-GEAR Signal Input Lead Connection methodInstallation Before Installing and Fixing Installation with the supplied bracketBefore Affixing the Adhesive Tape Installing the Display Using the Accessory Mounting Base Install the display basePaste the cushions onto the bot- tom of the display base Fix the display on the mounting baseDetermine the display installa- tion position Paste the mounting base onto the dashboardDashboard Tapping screws 3 ⋅ 12 mm Remove the display with the lock release lever Installing the Hide-away Unit Hide-away Unit InstallationSpecifications GeneralEnglish Español Deutsch Français Italiano Nederlands Table des matières Utilisation du menu de miseCher Client Importantes Mesures DE Securite Mise en place et retrait de l’écran Mise en place de l’écranInsérez la partie 1 dans les rainures 2 de la base Retrait de l’écran Quelques mots concernant cet appareil PrécautionService après-vente des produits Pioneer Enregistrement du produitAvant de vous servir de cet appareil Comment éviter de décharger la batterieComment protéger l’écran à cristaux liquides Pour garantir une conduite sûre Réinitialisation du microprocesseurTableau des commandes Composants et particularitésUnité écran Opérations de base Mise sous tensionRéglage du niveau sonore Sélection d’une source Sélection de la source désiréeChangement du mode d’affichage sur l’écran Full Remplir Just JusteCinema Cinéma Zoom ZoomUtilisation du menu de mise en oeuvre Accès au menu de mise en oeuvreAffichez le menu de mise en oeuvre Sélectionnez un réglageRéglage de l’image Réglez le posteDimmer Atténuateur de luminosité Réglez la luminositéSélectionnez un mode de connexion Réglages relatifs à la vidéoRéglage de l’entrée AV IN2 Le réglage initial de Polarity est Battery Sélection de l’image affichée sur l’écran arrière MENU-ENTERRéglage audio Réglage du mélange du guide vocal GuideUtilisation convenable de l’écran Maniement de l’écranPropos de l’écran à cristaux liquides LCD Entretien de l’écranPropos du petit tube fluorescent Branchement du système Chaque câble Noms et fonctions des prises de raccordement Appareil déportéBranchement du câble d’alimentation Méthode de connexionSchéma de connexion entrée Video Schéma de connexion Entrée 26 broches Connexion à la sortie audio et vidéo Cinch RCA Connexion du conducteur REVERSE-GEAR Signal Input Violet/BlancInstallation Avant l’installation et la fixation Installation à l’aide du support fourniAvant d’employer le ruban adhésif Installation de l’écran avec la base de montage fournie Installez la base d’écran et laCollez les coussinets sur le fond de la base d’écran Fixez lécran sur la base de mon- tageDéterminez la position d’installation de l’écran Collez la base de montage sur la planche de bordVis taraudeuse 3 ⋅ 12 mm Détachez lécran en libérant le levier de déblocage Installation de appareil déporté Précautions d’installationMontage de appareil déporté Caractéristiques techniques GénéralitésEnglish Français Deutsch Español Italiano Nederlands Page Page Pioneer Corporation
Related manuals
Manual 112 pages 48.57 Kb

AVD-W6210 specifications

The Pioneer AVD-W6210 is an advanced multimedia receiver designed to enhance your driving experience by providing a robust blend of entertainment and functionality. This sleek unit is particularly appealing to car enthusiasts who prioritize high-quality audio and video capabilities along with modern connectivity features.

At the heart of the AVD-W6210 is a vibrant 6.2-inch touchscreen display that offers an intuitive interface, making it easy for users to navigate through various media options and settings. The display's resolution ensures clarity whether you're watching a video or using navigation apps. The capacitive touchscreen technology enhances touch sensitivity, allowing for quick and responsive interactions.

One of the standout features of the AVD-W6210 is its extensive media compatibility. This receiver supports a variety of formats, including DVD, CD, and digital media files, making it versatile for all your entertainment needs. It also features built-in Bluetooth technology which allows for hands-free calling, as well as audio streaming from compatible devices. This wireless capability enhances safety by letting drivers keep their hands on the wheel while managing calls and music.

The AVD-W6210 is equipped with advanced audio processing technologies. Its high-performance amplifier and customizable EQ settings ensure that users can fine-tune their audio experience to suit their preferences. Additionally, the unit supports lossless audio formats and provides connectivity options for external devices, enhancing the listening experience.

Connectivity remains a key focus of the AVD-W6210, with USB and AUX input options readily available. This allows users to connect smartphones, tablets, and other devices seamlessly. Moreover, the receiver is compatible with both Android Auto and Apple CarPlay, making it easier than ever to harness your smartphone’s functionalities directly through the unit. This feature supports navigation and voice control, enabling users to access their favorite apps hands-free.

For those desiring enhanced sound quality, the AVD-W6210 offers compatibility with various external amplifiers and speakers, providing a route for users to elevate their audio system further. It also features multiple preamp outputs for easy installation of aftermarket amplifiers.

In conclusion, the Pioneer AVD-W6210 presents an exceptional choice for those looking to enrich their in-car entertainment experience with a blend of high-quality audio, intuitive controls, and modern connectivity technologies. Its thoughtful design and robust features make it a reliable companion for any journey.
Top Page Image Contents