Pioneer DEH-1530RXU/EW, DEH-1500RXU/EW Removing the CD Core UnitS10, Removing the Roller Arm Assy

1 2 3 4

A

Bevel Gear

Bracket

B

-Removing the CD Core Unit(S10)

	1.	Apply shorting solder to the Pickup flexible cable.
		Disconnect the cable.
	2.	Remove the solder from the four leads, and loosen
		the screw.
C	3.	Remove the CD core unit(S10).
	Caution: When assembling the CD core unit(S10), set Shorting

the mechanism to the clamp mode to protect the	Solder
switches from any damage.

D

-Removing the Roller Arm Assy

1.Remove the guide arm Assy and set the mechanism to the eject mode.

2.Remove the CD core unit(S10). (You do not have to remove the solder from the four leads.)

3.	Remove the spring and E-shaped ring from the
	fulcrum shaft.
4.	Slide the roller arm Assy in the direction marked
E	with an arrow.

Roller Arm Assy

E-Shaped Ring

F

50 DEH-1500R/XU/EW

Solder

CD Core Unit(S10)

1 2 3 4