Pioneer DEH-1510XU/EE How to hold the Mechanical Unit, Removing the Upper and Lower Frames

5 6 7 8

-How to hold the Mechanical Unit

1. Hold the top and bottom frame.

2. Do not squeeze top frame's front portion too tight, because it is fragile.

-Removing the Upper and Lower Frames

Do not squeeze.

A

B

1.With a disc clamped, remove the four springs (A), the two springs (B), the two springs (C), and the

four screws.	C
2. To remove the upper frame, open it on the fulcrum
A.	A
3. While lifting the carriage mechanism, remove the
three dampers.
4. With the frames removed, insert the connectors
coming from the main unit and eject the disc.
Caution: Before installing the carriage mechanism in
the frames, be sure to apply some alcohol to the
dampers and set the mechanism to the clamp mode.
Carriage Mechanism

A

Upper Frame

A

A

C

D

B

A

C

Damper

Lower Frame

Damper

BDamper

-Removing the Guide Arm Assy

1.Remove the upper and lower frames and set the mechanism to the clamp mode.

2.Remove the two springs.

3.Remove the two screws and bevel gear bracket. Note that the gears come off.

4.Slide the guide arm Assy in the direction marked

with the arrow (1) and open it upwards.
5. At the angle of about 45 degrees, slide the guide Spring
arm Assy in the direction marked with the arrow	3

(3) to remove it.

2

1

E

Guide Arm Assy

Spring

		DEH-1500R/XU/EW		49
5	6		7		8

F