4. Route the cables via the cable clip.
Release the cable retaining clip by squeezing the clip inwards as illustrated. Position the cables together and reinsert the clip over them to retain the cables neatly in place behind the monitor stand.
5.Connect the power cable to a wall power outlet and press Power on the monitor.
Plug the other end of the power cord into a power outlet and turn it on.
Turn on the monitor by pressing the power button located at the top of the row of buttons on the left edge of the monitor.
Turn on the computer too, and follow the instructions in Section 4: Getting the most from your BenQ monitor on page 14 to install the monitor software.
10 How to assemble your monitor hardware