Boss Audio Systems bv9565bi manual Tuner, RDS Setup, Specifications

08 Tuner

Before You Start 01

RDS Setup

3 2 1

Alternative Frequencies

Briefly press 26 AF to activate the auto searching station function. When AF is on,

Specifications

7

4

5

RDS

: NONE

OFF

NONE

8

87.50MHz

SCH
OFF
OFF	9
OFF	10

6

the unit will skip to the RDS Frequency with good signal.

Note:

* It is also performed by pressing 1 in the

monitor.

Traffic Alarm

Briefly press 25 TA to activate the traffic

General

Power Requirement	14.4V DC
	(11-16V allowable)
Load Impedance
Max.Power Output	85W X 4
Tone Controls	7dB
	Bass 100Hz

AM Tuner Section

Frequency Range	522-1620(KHz)
(Optional)	(Europe)
	530-1710 (KHz)
IF Range	(U.S.A.)
	450KHz
Usable Sensitivity	32dBuV
(-20dB)

1AF(Alternative Frequencies)

Press it to activate AF function.

2TA (Traffic Alarm)

Press it to activate TA function.

3

Press it to select PTY code.

4PTY(Program Type)

Press it to activate PTY function.

5During PTY ON, press this button to search the playing track s type.

6BACK

Press it to turn to return to the radio.

7PS:

To display the current RDS station's programs information.

8SEEK+/-

Press it to tune automatically.

9TP(Traffic Program)

TP OFF: the current station doesn't have

any trafic programs

TP Search Search for stations with traffic

programs

TP ON: the current staion is broadcasting

trafic program

10EON ON(Enhanced Other Networks

information)

EON OFF: No station has TP;

EON ON: RDS signal finds that another station is broadcasting trafic program and reminds the user of searching this station.

alarm function. When AF is on, there is TA displayed on the LCD. If there is no TP, the mode will search TP stations automatically.

The TA is green when it is played by a sta- tion, if not, it is yellow.

When TA is playing, the volume will be ad- justed to a TA level automatically When in other modes (such as DISC,AUX), if a TA program is played, the mode will skip to the RDS status automatically. It will resume to the primary mode after the TA is over.

Note:

* It is also performed by pressing 2 in the monitor.

* When TA is off, the LCD will not display TA .

Program Type

Briefly pressing 7 PTY to activate PTY function.

When PTY is on, PTY ON appears in the monitor. You can press UP/DOWN

to select the program type, and then press PTY CODE to search the special program. The monitor displays PTY SEARCH.

If PTY is off, PTY OFF appears in the monitor and the searching is disabled.

Note:

* It is also performed by pressing 4 in the

monitor.

	Treble 10KHz
Dimensions	Approx.184 x 178 x100
	mm (d/w/h)
Mounting	Approx.164 x183x112
Dimensions	mm (d/w/h)
Weight	Approx.3.5kg

FM Section

Tuning Range	87.5-108(MHz)
(Optional)	(Europe)
	87.5-107.9(MHz)
	(U.S.A.)
IF Range	10.7MHz
Usable Sensitivity	10dBuV
(-30dB)
Signal-to-noise Ratio	60dB
Stereo Separation	30dB 1KHz
Frequency Response	40-12KHz

VCD/CD Player Section

VCD Signal System	AUTO/PAL/NTSC
Signal-to-noise Ratio	60dB
Separation	55dB(1KHz)
Distortion	0.3%
Resolution	1440 X 234 plxels
Brightness	600 NITS

DISC Player Section

DISC Signal System	AUTO/PAL/NTSC
Channels	2
Frequency Response	40Hz to 16KHz
Signal-to-noise Ratio	60dB
Separation	60dB

Note:

Due to continuous product improve- ment, specifications and design are subject to change without notice.

38 11