Connecting the Power Supply and Various Devices
Setting the Stand and the Display
1. Loosen and remove the screw for the cable fastener at the bottom of the opening of the stand with a Phillips screwdriver.
2. Route the connected cables into the stand, passing them through the opening. Remove the cutouts at the 4 locations in the stand base with pliers and pull the cables through.
+Do not insert fingers into the cutout. This may result in injury.
3. Hook the display onto the tab on the stand and adjust the routed cables so they will not sag too much or be too tight. Arrange the cables so they will not overlap, and fasten with the cable fastener and secure with a screw.
Hook