Casio V-R7100, V-R7000 user manual MCR Unit VA-B46MCRE Installation

Page 31

Connecting the Power Supply and Various Devices

• The display may be wall-mounted. In this case, the stand is not used.

Screw holes for wall-mounting

For further details, contact the CASIO service representative.

MCR Unit (VA-B46MCRE) Installation

+Beforethe powerinstallation,outlet. be sure to turn the main power switch OFF and remove the plug from

(1) Remove the MCR unit cover with a Phillips screwdriver etc. and connect the MCR unit connector.

(2) Install the MCR unit as shown in the illustration and secure it with 2 screws (supplied).

Installation

+Duringthe display.installation, take care not to trap the connected cable between the MCR unit and

For how to install a printer or other optional device, refer to the Operating Instructions supplied with the optional device.

E-29

Image 31

Contents R7000 V-R7100 Page Contents Using the AC power supply Safety PrecautionsDo not let any foreign object or water get inside LCD Not applicable to other areas Regulatory Information USA and CanadaUsers should also be advised that Europe 0984Installation Location Precautions for UseTake Advance Notice of the Following Confirming the Accessories Basic Operation Front Name of Parts and What They DoRear Left side when the side cover is opened Turning the Power OFF shutdown Power ON/OFFTurning the Power on Turning to sleep modeUsing the Power Switch Moving and CleaningDescription of the Indicator Adjusting the Angle of the Display Installation Left side on the back of the display Right side on the back of the display MCR Unit Installation PartsConnecting the Drawer cable Connecting the Power Supply and Various DevicesOrder of Connection Connecting Other Devices Connecting the AC AdaptorConnecting the Printer Cable Insert the SD Card Connecting the Hdmi DevicePreparing the Stand Setting the Stand and the Display Installation Installation features MCR Unit VA-B46MCRE Installation Specification Specification Memo Page MA1402-A R7000*ESFG