Radio Mode

Press the SRC button on the front panel or remote control to switch to the Radio source.

1.Source Indicator

2.Current Preset Channels

3.Time/Clock

4.AM/FM Band

5.Radio Station Frequency

6.EQ Indicator

Press BAND once or more to select FM1- FM2 - FM3 - AM1 - AM2.

Display shows wave band, frequency, and preset station number if already stored.

Selecting a Station

Press the or tuning button to tune to another station.

- AUTO SEEK

Press the or buttons to seek the next/ previous station automatically.

Press and hold the or buttons to enter manual tuning mode. Press the buttons again to move the radio frequency number up or down one step.

Note:

During manual seeking, if the pause between two operating steps is longer than 5 seconds,

press the or buttons, the unit will enter auto seeking.

Six numbered preset buttons store and recall stations for each band. The stored stations (P1-P6) for the current band can be viewed on the screen.

1.Select a band (if needed).

2.Press AMS briefly to scan the preset station P1 - P6 for 5 seconds each.

3.Hold AMS more than 2 seconds, the 6 strongest available stations will be automatically saved in the preset button (numbers 1-6).

1.Select a band (if needed), then select a station.

2.Press and hold a preset button (numbers 1-6) on the front panel or remote control.

3.The preset number and station is displayed and highlighted.

1.Select a band (if needed).

2.Press a front panel or remote control preset button (numbers 1-6) to select the corresponding stored station.