Dell S1709W Using the OSD Menu, Enter, Use the Power button to turn the monitor on and off

D	Use this button to select the input source or select an OSD menu option.
	NOTE: The floating 'Dell Self-test Feature Check' dialog appears on a black background if the monitor cannot sense a video
	signal. Depending upon the selected input, the following dialog boxes scroll continually on the screen.
	Enter

E Use the Power button to turn the monitor on and off.

A white power light indicates that the monitor is on and fully functional. An amber power light indicates that the monitor is in power save mode.

Power Button and

Indicator

Using the OSD Menu

NOTE: If you change the monitor settings and then either proceed to another menu option, or exit the OSD menu, the monitor automatically saves the changes. Changes are also saved if you make the changes and wait for the OSD menu to disappear.

1. Press thebutton to open the OSD menu and display the main menu.

NOTE: Dell S1709W Flat Panel monitor supports analog (VGA) input only.

NOTE: Positioning and Image Settings are only available when you are using the analog (VGA) connector.

2.Press the Ù and Ú buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the table below for a complete list of all the options available for the monitor.

3.Press thebutton once to activate the highlighted option.

4.Press Ù and Ú button to select the desired parameter.

5.Pressto enter the slide bar and then use the Ù and Ú buttons, according to the indicators on the menu, to make your changes.

6.Press thebutton once to return to the main menu to select another option or press thebutton two or three times to exit from the OSD menu.

Icon	Menu and Submenus	Description
	Brightness & Contrast	Brightness adjusts the luminance of the backlight. Adjust Brightness first, then adjust Contrast only if further adjustm
		Press the Ù button to increase luminance and push the Ú button to decrease luminance (min 0 ~ max 100).
		Contrast adjusts the degree of difference between darkness and lightness on the monitor screen.
		Press the Ù button to increase the contrast and press the Ú button to decrease the contrast (min 0 ~ max 100).