BATTERY REPLACEMENT
NOTE: Before using remote after installation, remove the battery plastic protective slip.
Remote Controller
+ side Battery
Latch | Battery Holder |
1.Move the small latch to the right and slide out the battery holder.
2.Remove old battery and replace it with a new battery (CR2025) with the positive “+” sign facing as shown above.
3.Push battery holder back into its compartment until it is locked.
PRECAUTIONS
1.Properly dispose of used battery.
2.Do not misuse battery by shorting the positive “+” and negative
3.If the remote is not to be used for a long period, remove the battery from the remote to prevent dam- age from battery leakage.
4.To avoid accidents, prevent children from playing with the battery.
Operation
OPEN—LCD SCREEN
To open the LCD screen press the OPEN/CLOSE button and carefully rotate the LCD screen down to its operating position.
CLOSE—LCD SCREEN
To close the LCD screen rotate the LCD screen up to its stored position until you hear the OPEN/CLOSE button click.
12 | © 2004 Directed Electronics, Inc. |