Directed Electronics OHD070A manual Installation, Preliminary Preparations, Mounting Video System

Installation

PRELIMINARY PREPARATIONS

NOTE: The unit should be installed by a qualified service technician. This unit is designed to operate with a 12 VDC, negative ground battery system.

NOTE: Use only proper sized fasteners and cables during installation. Use of improp- er fasteners or cables can lead to mechanical failure of the unit or create a fire haz- ard.

1.Disconnect the ground wire from the battery terminal prior to connecting the unit to the electrical system.

NOTE: Some vehicle radios have an anti-theft code system that will disable the radio if the battery is disconnected. If this vehicle has such a radio, ensure you have the access code to restore the radio to normal operation.

2.Pick a location to install the monitor where it will not obstruct the rear view mirror or the air conditioning vents.

3.Do not install this unit at an angle exceeding 30 degrees.

MOUNTING VIDEO SYSTEM

8 © 2004 Directed Electronics, Inc.