Your doorbell system includes:
•Two
•Two doorbell buttons/transmitters with batteries
•Two hardware packs
Wireless
Plug-In
Doorbell
System
As shipped from the factory:
•Both chimes will sound when either button is pushed. The system can be changed so that one chime responds to the factory set door button, while the other chime responds to a new customer setting.
•See pages 2 and 3 to change codes and sounds.
1.Plug-in the doorbell chime.
To reduce the risk of electrical shock, this equipment has a polarized plug (one blade is wider than the other). This plug will fit in a po- larized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
2.Before mounting, test the doorbell range.
Operation
Press the doorbell button to verify that the doorbell and chime work properly. If the chime does not sound see the Troubleshooting guide on page 4.
Push
Button
Doorbell Button
© 2003 DESA Specialty Products™ |