Electrical Specifications

Dayton Operating Instructions and Parts Manual

Model 4E769B

General Safety Information

(Continued)

•The electrical connections and grounding of the heater shall follow the National Electric Code, ANSI/ NFPA 70.

•Use only the electrical voltage and frequency specified on model plate.

•Electrical grounding instructions — This appliance is equipped with a three-prong (grounding) plug for your protection against shock hazard and should be plugged directly into a properly grounded three-prong receptacle.

•Use only a three-prong, grounded extension cord.

Specifications

Electrical
Input		Amperage
120 Volt/60Hertz		2
GENERAL SPECIFICATIONS
Output			Fuel	Size	Regulator	Weight
Rating BTU/Hr	Fuel		Consumption	L x W x H (Inches)	Outlet Pressure	(pounds)
35,000	Only Propane Vapor .38 Gallons/Hour			18.5 x 7.7 x 12.8	11" WC	14.5 (Heater)
			1.6 Pounds/Hour			16 (Shipping)

GENERAL SPECIFICATIONS (Cont.)

Manifold	Hot Air Output		Supply Pressure	Temperature Range
Pressure	(CFM Approx)	Ignition	To Regulator	For Operating Heater	Motor
10.8" WC	175	Manual	10 psi Minimum (for)	-20°F to 85° F*	2735 RPM
		Piezo	purposes of input

adjustment) Tank Pressure or 200 psi Maximum

(*)When running heater in temperatures above 85° F, high internal temperatures may cause thermal limit device to shut down heater.Minimum ambient operating temperature: -20°F (-28°C).

Version B - For Reduction

G016.J