Programming during Video Intro

Operation

1.Stop play.

2.Press the PROGRAM button so that PROGRAM is lit in the display.

3.Press the disc button you want to play, and enter 1 on the number keys.

4.Press the 3SELECT button and then, after the disc has started to play, press the VIDEO INTRO button.

5.The Player starts to display in sequence the first five (5) seconds and track numbers of all tracks on the disc. Select the numbers you want to program. You can program nine (9) tracks.

6.Press the 3 SELECT button to play.

Viewing the highlights of a video CD

This function is used for a movie video CD.

Preparations

•When you play a video CD with the Playback Control function, the mode switch should be in the PBC OFF mode or KARAOKE mode.

•This function is controlled by the remote control unit.

Operation

1.Start playing the track you want to see the highlights of.

2.After the track begins to play, press the HIGHLIGHT button on the remote control.

		HIGH LIGHT
HIGHLIGHT
	1	2	3
	4	5	6
(Remote control)	7	8	9
(Remote control)
		(Television screen)

3.To select one of the nine (9) segments, press the number key (1 to 9) of the segment which you want to play.

Notes

•When you choose a highlight it will start from five (5) seconds before the shown time below each segment.

•The highlights show the proceeding five (5) seconds up to the displayed time on each highlight.

•The segments are each of nine (9) equal-time divisions of the track.

•Nine (9) different highlights are displayed for one (1) minute.

•If no highlight is chosen in the one (1) minute period in NORMAL mode or PBC OFF mode, the next nine (9) segment highlights will begin. In KARAOKE mode highlights will stop.

•While in VIDEO INTRO or HIGHLIGHT, sometimes image is partially distorted. This symptom is caused by noise in the disc itself or incorrect manufacturing, not by a malfunction of the Player.

VARIOUS UNIQUE FUNCTIONS

Selecting the SPATIALIZER mode

You can change the sound ambiance and enjoy a different sound using the Spatializer function.

Operation

1.Choose one of the following two sound modes to change the sound ambiance.

SPATIALIZER H : For movies and television programs

SPATIALIZER L : For music clips

2.To select the Spatializer mode, push the SPATIALIZER button one or more times.

When one of the Spatializer modes is selected, the SPATIALIZER indicator on the front panel is illuminated.

SPATIALIZER

Each time you press the button, you toggle the mode as follows:

SPATIALIZER H SPATIALIZER L OFF

(Television screen)

3.To cancel the effect, press the SPATIALIZER button until the word “OFF” appears on the television screen.

Note

•Depending on which type of TV, amplifier or receiver to combine with this device or which software to play back, sound may be distorted when the SPATIALIZER function is turned on. In such cases, set SPATIALIZER mode to “L”.

•In the following cases, the SPATIALIZER function does not work even when it is turned on. Always use this function in specified mode.

1)Be sure to set MPX mode of this device to “OFF (Lch + Rch)”. When set to “L mono” or “R mono” mode, the SPATIALIZER function does not work.

2)Be sure to set the sound mode of the TV, amplifier or receiver which is connected to this device to “STEREO”. When set to monaural mode, the SPATIALIZER function does not work. The SPATIALIZER function does not work with monaural TV, either.

3)When sound multiplex (KARAOKE) software is played back with the SPATIALIZER function turned on, you may have an “unnatu- ral” feeling of sound spatiality. To play back sound multiplex software, basically set SPATIALIZER mode to “OFF” or “L”.

4)The SPATIALIZER function does not work for the sound which is recorded through the MIC terminal of this device.

•This function is not effective if you attempt to use, at the same time, the similar function of a television, receiver or other device connected to this Video CD Player. Turn off the function on your television, receiver, or other device before selecting your Video CD Player’s SPATIALIZER mode.

Certain audio features of this product manufactured under a license from Desper Products, Inc., Spatializer® and the circle-in- square device are trademarks owned by Desper Products, Inc.

English

Page 13