RESTRICTING USE OF YOUR DISCS
Locking a disc with the Read-Protect function
Locking a disc
The
Notes
•When you lock a disc using the
•You cannot lock a disc while it is playing, or when the VCD light is blinking (i.e., immediately after turning on the player or shutting a disc tray). Stop the disc, then lock it.
•All
Operation
1. Play the disc for a moment, then press the Stop button.
STILL
2.Hold down the NEXT button on the Player for at least three seconds. The track and time numbers are no longer displayed.
NEXT
3.Press the Number key “8” four times. The Display window indicates “Loc.”
Now the disc cannot be viewed. You can open and close the tray and you can turn the Player power on and off, but no other functions are available for this locked disc.
Notes
•PROTECT is displayed on the television screen.
Cut out the following instructions and keep them separately, to ensure privacy.
Canceling Read-Protect
Operation
1.Place the disc in a tray, then press the Disc button for that tray. PROTECT is displayed on the television screen.
2.Hold down the PREV (Previous) button on the Player for more than three seconds. The indication “Loc” in the Display window will flicker for a moment.
PREV
3.Press the Number key “8” four times. You can now play the disc.
+
Canceling Read-Protect for a single viewing
Operation
1.As above, hold down the PREV (Previous) button on the Player for at least three seconds. The indication “Loc” in the Display window will flicker for a moment.
PREV
2.Press the Number key “7” four times. You can now play the disc, but only until you press the OPEN/CLOSE button for that disc, or until you play another disc. (Turning off the Player power does not lock the disc again.) This function is conve- nient when you want to play a disc, but you also want to restrict its use later.
Page 20