JVC KW-AVX846 user manual Setting menu items

Car audio and car goods internet store Winauto

Setting menu items

• You cannot change <Audio> settings (except <Amplifier Gain>) when the AV source is turned off.

Menu item		Selectable setting/item					Initial: Underlined
	Fader/Balance	Fader : Adjust the front and rear speaker output balance.
		♦ F6 to R6; Initial 0
		• When using a two-speaker system, set the fader to the center (0).
		Balance : Adjust the left and right spe					ker output balance.
		♦ L6 to R6; Initial 0
		Press [5/∞/2/3] or drag [				] to	djust.
		• To clear the adjustment, press [Center].
	Equalizer	Change the sound mode or adj			st and store the equalization for each source.
		(☞page 32)
		♦ Fla /Na ural/Dynamic/Vocal Boost/Bass Boost/Vibrant/User
	Loudness	You can ac iva e/deactivate the loudness function.
		♦ Off	:	Cancels.
		♦ On	: Boost low and high frequencies to produce a well-
				balanced sound at a low volume level.
Audio	Crossover	Adjust the cross over frequency. (☞page 33)
	Volume Adjust	Adjust and store the auto-adjustment volume level for each source. (For
		discs, the adjustment is stored for each of the following categories: DVD/
		DVD-VR, VCD/CD, and DivX/MPEG1/MPEG2/MP3/WMA/WAV.) The volume
		level will automatically increase or decrease when you change the source.
		♦ –15	+06; Initial 00
	Amplifier Gain*	You can change the maximum volume level of this unit.
		♦ High	: VOL 00 to 50
	winauto
		♦ Low	: VOL 00 to 30
				(Select this if the peak power of the speakers is less
				than 50 W.)
		♦ Off	:	Deactivates the built-in amplifier.

•If you change this setting from <High>/<Off> to <Low> while the volume level is set higher than the maximum level of <Low>, the unit automatically lowers the volume level to “VOL 30”.

* You can change the setting only when the AV source is turned off.

39