Optional Equipment, Disconnecting the Battery

Optional Equipment

•NAV102: Allows you to access navigation features. All installation and operating instructions are included with the navigation module.

•Rear Camera

Disconnecting the Battery

To prevent a short circuit, be sure to turn off the ignition and remove the negative (-) battery cable prior to in- stallation.

NOTE: If the VM9224BT is to be installed in a car equipped with an on-board drive or navigation computer, do not disconnect the battery cable. If the cable is disconnected, the computer memory may be lost. Under these conditions, use extra caution during installation to avoid causing a short circuit.

Replacing the Fuse

When replacing the fuse, use a new 20A replacement fuse. Using a fuse with an improper rating could damage the unit and cause a ﬁre.

ISO-DIN Installation

This unit is designed to ﬁt into a 2.0 DIN dashboard opening, found in many imported cars. The unit has threaded holes in the chassis side panels which may be used with the original factory mounting brackets of some Toyota, Nissan, Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the radio to the dashboard. Please consult with your local car stereo specialty shop for assistance on this type of installation.

1Remove the existing factory radio from the dashboard or

	center console mounting. Save all hardware and brackets
	as they will be used to mount the new radio.
2	Remove the factory mounting brackets and hardware from
	the existing radio and attach them to the new radio.	EJECT
	CAUTION: Do not exceed M5 X 6MM screw size. Longer
	screws may damage components inside the chassis.	MUTE
3	Place the radio in front of the dashboard opening so the
	wiring can be brought through the mounting sleeve. Fol-
	low the wiring diagram carefully and make certain all con-
	nections are secure and insulated with wire nuts or electri-
	cal tape. After completing the wiring connections, plug the
	ISO connectors into the mating sockets on the rear of the
	chassis. Turn the unit on to conﬁrm operation (vehicle ignition switch must be “on”). If the unit does not
	operate, re-check all wiring until the problem is corrected.
4	Mount the new radio assembly to the dashboard or center console using the reverse procedure in step 1.

CAUTION! Be careful not to damage the car wiring.

NOTE: It is the end-users responsibility to install and operate this unit in a manner in accordance with local, state and federal laws. The PARKING BRAKE wire MUST BE CONNECTED as directed in the manual.

CAUTION: Do not block the cooling fan exit. If blocked, the unit may overheat and become damaged.

VM9224BT specifications

The Jensen VM9224BT is an innovative multimedia receiver that brings a wealth of features and technologies to enhance your driving experience. Designed for modern vehicle interiors, this receiver combines functionality with an intuitive interface, allowing drivers and passengers to stay connected and entertained on the go.

One of the standout features of the Jensen VM9224BT is its large 6.2-inch touchscreen display. The display provides clear visibility and is responsive to touch, making it easy to navigate through menus and settings. The user interface is designed for simplicity, offering a user-friendly experience that minimizes distractions while driving.

In terms of connectivity, the VM9224BT offers built-in Bluetooth technology. This enables hands-free calling and audio streaming. Users can easily connect their smartphones or tablets to the receiver, allowing for seamless access to music, podcasts, and navigation apps. The Bluetooth feature enhances safety by keeping the driver's hands on the wheel and eyes on the road.

The Jensen VM9224BT supports USB and AUX inputs, giving users multiple options for connecting their devices. For those who prefer to listen to their favorite FM/AM radio stations, the receiver includes a built-in tuner with programmable presets to quickly access preferred channels.

Another notable characteristic is its compatibility with various media formats. The VM9224BT can play DVDs, CDs, and digital files, ensuring that users can enjoy their media in whichever format they prefer. The receiver also comes with a rear-view camera input, enhancing safety during reversing maneuvers by displaying the camera feed directly on the screen.

The sound quality of the Jensen VM9224BT is impressive, thanks to its built-in 4-channel amplifier that delivers a powerful audio experience. It offers customizable EQ settings, allowing users to fine-tune the audio to their liking. Additionally, the receiver includes preamp outputs for those looking to enhance their audio system further with external amplifiers.

Finally, the VM9224BT is designed with a sleek aesthetic that complements any vehicle interior. Its ergonomic button layout and variable color illumination allow for a personalized touch, culminating in a modern multimedia receiver that fits seamlessly into contemporary vehicles.

In summary, the Jensen VM9224BT stands out as a versatile and feature-rich multimedia receiver, making it an excellent choice for anyone looking to upgrade their car audio and entertainment system. Its combination of a responsive touchscreen, Bluetooth connectivity, versatile media support, and impressive sound quality ensures that users can enjoy a connected and immersive driving experience.