VM8012
GOTO Direct Track Access
Use the GOTO function to access a track directly.
1.Press the GOTO button on the remote control. The track number will become highlighted.
2.Use the number keys on the remote control to enter the track number directly.
3.Press the ENTER button to confirm and begin playback.
Programmed Playback
1.Press the PROG button on the remote control to access the pro- grammed playback screen:
2.Use the 
, 
, 
or 
cursor buttons to access the fields on the “PROG” screen.
3.Use the number buttons on the remote control to enter a track number in each field.
4.Press the >/ button (8) or highlight “PLAY” on screen and then press ENTER to begin playback in the numbered order indicated.
To delete the list, highlight “CLEAR” and then press ENTER. Press PROG to exit the programmed playback screen.
VCD PlayBack Control (VCD Only)
If you insert a VCD with playback control, playback automatically starts at the beginning of the first track.
•Press the PBC button on the remote control to access the VCD menu.
•Use the TUNE/TRACK >> or << buttons (17) to select the desired track.
•Press the 
(stop) button to return to the menu.
•Press PBC again to exit the menu.
DVD Playback Features
The following remote control features are available during DVD playback:
•AUDIO: Press to choose an alternate audio language, if available.
•
•TITLE: Press to display the title or chapter list. Use the 
, 
, 
or 
cursor buttons or the numeric buttons to enter a title or chapter number, and then press ENTER to play.
•ANGLE: Press to select an alternate viewing angle, if available.
•ZOOM: Press to zoom the picture at X2, X3, X4, X1/2, X1/3 or X1/4, or select OFF to return to normal view.
NOTE: Feature availability is dependent on DVD embedded information.
Disc Player Error Codes
If a problem should develop while operating the Disc player, an error code may appear on the display panel. This can indicate a number of problems with the unit, including a mechanical error or an error in the microprocessor control. If an error code appears, try ejecting and reloading the disc into the player. While the disc is out of the unit, make sure it is clean and undamaged, and then load it correctly. If this does not solve the problem, pressing the RESET button (22) may help, but will erase the time and preset memory. If the suggested measures do not solve the problem, contact an approved warranty station near you for further assistance.
10