Jensen VM8012 DISC/MP3/WMA Playback, Insert and Eject Disc, Controlling Disc or File Playback

VM8012

DISC/MP3/WMA PLAYBACK

	20	21
	LOC	MUTE
/	RDM
1	4
		LOUD
INT
2	5
RPT		ST/MO
3	6
SRC DISP	AS	BAND

Insert and Eject Disc

Press the button (4) to flip the front panel down. Insert a disc, label side up, into the disc slot (18).

18 22 1

To stop disc play and eject the disc, press the button to flip the front panel down and then press the eject button (1).

NOTE: The unit is designed for play of standard 5” (12 cm.) discs only. Do not attempt to use 3” (8 cm.) CD singles in this unit, either with or without an adaptor, as damage to the player and/or the disc may occur. Such damage will not be covered by the warranty on this product.

Controlling Disc or File Playback

Pause

Press the pause >/ button (8) to suspend playback. Press the pause >/ button again to resume playback.

Track Select

Press the TUNE/TRACK >> or << buttons (17) for less than one second to advance to the next track/file. The selected track number will appear on the display.

Fast Forward/Reverse

Press and hold the TUNE/TRACK >> or << buttons (17) to fast forward or fast reverse. Press and hold once for 2X. Press and hold additional times for 4X, 8X, 20X or PLAY. Press the play/pause >/ button (8) to end fast forward or reverse and resume normal playback.

Intro Scan (INT)

During disc play, press the INT button (9) to select “INTRO” and play the first 15 seconds of each track/file. When the desired track is reached, press INT again to end the scan and play the selected track.

Repeat (RPT)

Press the RPT button (10) multiple times during playback to select from the following repeat play options:

•VCD/CD: RPT ONE (track), RPT ALL (disc), RPT OFF

•DVD: RPT CHAPTER, RPT TITLE, RPT OFF

•MP3/WMA: RPT ONE (file), RPT DIR (directory/folder), RPT ALL (disc),

RPT OFF

Random (RDM)

Press the RDM button (11) during playback to select “RANDOM” and play all tracks/files in random, shuffled order. Press RDM again to stop random play.

Section Repeat (A-B)

To repeat a specified section of a track, perform the following steps:

1.Press the A->Bbutton on the remote control to select the starting point. The display will show “REPEAT A-”.

2.Press A->Bwhen you reach the desired ending point. The display shows “REPEAT A-B” and the selected section will play repeatedly.

To cancel section repeat, press the A->Bbutton again. “A-B CANCEL” appears on the display.

9