ViewEra V191 BN Series user manual Important Precautions

Page 4

IMPORTANT PRECAUTIONS

1.Before using this device, please read all the instructions in this manual carefully.

2.Please keep the manual carefully for future reference.

3.Unplug this device from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp or wet cloth to clean. Please use LCD screen detergent for cleaning if it is still dirty.

4.Do not use the parts not recommended by the manufacturer, otherwise it may cause a hazard.

5.When unplugging the power cord of the display or adapter, please hold the plug and do not pull the cord directly.

6.Do not place any object on the power cord. Do not trample it either.

7.Do not use the device near water sources, e.g. bathtub, basin, kitchen sink, or washing machine. Do not place the device on a wet floor, or near a swimming pool etc. Do not touch the screen with your fingers or other hard objects.

8.Slots and openings on the housing and its back or bottom are provided for ventilation. To ensure reliable operation of the components and to protect them from overheating, these openings must not be blocked or covered placing the device on a bed, sofa, rug, or other similar surface. The device should never be placed near or over a radiator or heater and should not be placed in a built-in installation unless proper ventilation is provided.

9.Make sure that the device is at least 5 cm distance from the wall or other objects around when it is in use.

10.The power supply must respond to that stated on the rating plate. If you have any query about the power supply, please refer to the dealer or local power supply provider.

11.As a safeguard measure, the display or adapter is equipped with a power cord with three-terminal plug, the third terminal is grounded. If the plug cannot be inserted into the outlet, please contact an electrical technician for replacing the original outlet while keeping the safeguard measure in effect.

12.Ensure that the power socket and cord in use are able to take the sum of the rated currency of all the products.

13.Do not put the device at the place where user is subject to mal-operation.

14.Observe all the warnings and instructions described in the manual.

15.Do not overload the power outlet or use any extension cord, otherwise it may cause fire or electric shock.

16.Do not attempt to repair this device yourself since opening or removing covers may expose you to dangerous voltage or other hazards. Refer servicing to qualified service personnel.

17.Unplug this display or AC adaptor from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power cord or plug is damaged or worn.

b.If the device has been dropped or its housing has been damaged.

c.When the performance of the device deteriorates distinctly.

18.The power cord is the main facility to turn on/off the device; unplug it if the device is not used for a long period of time.

19.Store the device at a place of good ventilation; avoid strong sunlight, high temperature or humidity.

20. Store the device at a place at -20 ~55 room temperature.

3

Image 4 Contents
TFT-LCD Security Monitor Table of Contents EMC Compliance Important Precautions Features Package contentsIntroduction GeneralConnecting the signal cable Connecting the power adapter and power cordConnecting the audio cable Installing the monitor basePower on Choosing the optimal resolutionPower button Power indicator2button Auto / Exit / Signal Source Control buttonsOSD menu in VGA mode ContrastBrightness Sharpness Color Temperature User RGB Image PositionPosition Phase Clocks Page Volume Audio menuFeature Controls Sleep TimerLanguage menu OSD ControlsOSD H Position OSD V Position OSD Rotate OSD Timer Factory RecallVideo menu OSD menu in AV modeHot Key Warranty & Customer Service WarrantyCustomer Service Dead Pixel PolicyTroubleshooting No Input SignalappearsNo image Image is blurry or not positioned correctlySpecifications 15security monitor17security monitor 19security monitor