Troubleshooting Tips
EN
Problem | Solution | |
System doesn’t turn | • Unplug the unit for a moment, and then plug it back in. | |
on | • Check the outlet by plugging in another device. | |
|
|
|
No sound | • | Adjust volume setting. |
| • Make sure you’ve selected the correct function. | |
|
| |
Poor radio reception | • Adjust the antenna for better reception. | |
| • Try turning off electrical appliances near the unit, such as hair dryers, | |
|
| vacuum cleaners, or fluorescent lights. |
|
| |
CD doesn’t play | • Make sure you’ve put a CD in the tray. | |
| • Make sure the CD’s label is facing up. | |
| • | Try another CD. |
| • Make sure that Pause mode is not activated. | |
| • Make sure CD function is selected. | |
|
| |
CD sound skips | • Clean the CD (as explained in “Maintenance”). | |
| • Check CD for warping, scratches, or other damage. | |
• Check for vibration or shock that may affect the unit; move the set if necessary.
ESD Remark:
In case of misfunction due to electrostatic discharge just reset the product (reconnect of power source may be required) to resume normal operation.
10
TM9049 EN | 14 | 1/7/05, 10:19 AM |