Before You Begin
EN
Useful Advice
•Do not use your system immediately after transporting it from a cold place to a warm place, as condensation may cause the system to malfunction. If moisture forms inside this system, it may not operate properly. To correct the problem, turn off the power and wait about 30 minutes for moisture to evaporate.
•This system is fitted with a laser. To avoid accidents, it is to be dismantled by qualified technicians only.
•Never leave the tray open as dust could cover the laser lens and/or the tray could be bumped into accidentally.
•Do not place the system near wet areas such as bathrooms and pool side. Avoid storing the system at humid places or near abnormally heated areas.
•Power is continuously supplied to the system. To disconnect power completely, unplug the power cord from the power outlet.
2
•Ensure minimum distance around the apparatus for sufficient ventilation.The ventilation should not be impeded by covering the ventilation openings with items, such as newspaper, etc.
•No naked flame source, such as lighted candles, should be placed on the apparatus.
•Attention should be paid to enviornment aspects of battery disposal.
AC Power
Plug the power supply cord into the AC power jack on the back of the unit, and into an AC power supply outlet that accepts the plug supplied with your unit.
TM9049 EN | 6 | 1/7/05, 10:19 AM |