1 EM1 Quick Reference Guide
User Remote controller
The User remote is used for day to day operation. It has basic functions such as:
• Volume Up and Down
and Mute
• Channel Up and Down
• Power On and Off
• Mode Select
Please refer to Section 4, Using the Remote Control, for further details.
The intent of the Master remote
is to set up the monitor for Master Remote controller client use. It has all of the
features of the client remote with the addition of the follow- ing controls:
•Contrast
•Color
•Bright
•Edit
•Auto Program
Please refer to, Section 4 Using the Remote Control, for further details.
Page 2
4 Using the Remote Control
Master Remote Operations
The master remote has all the features of the user remote plus five set up features. These features include:
•CONTRAST - Contrast has a scale from 0 (lowest setting) to 16 (highest setting). The factory default is set at 8. To change the contrast push the CONTRAST button once. This will display a scale on the bottom middle of the screen. Use the VOLUME up and down arrows to select the desired setting.
•COLOR - The color setting has a scale from 0 (lowest setting) to 16 (highest setting). The factory default setting is at 8. To change the color, push the COLOR button once. This will display a scale on the bottom middle of the screen. Use the VOLUME up and down arrows to select the desired setting.
•BRIGHT - The brightness setting has a scale from 0 (lowest setting) to 16 (highest setting). The factory default setting is at 8. To change the brightness push the BRIGHT button once. This will display a scale on the bottom middle of the screen. Use the VOLUME up and down arrows to select the desired setting.
•EDIT - The edit button will allow you to customize your TV and CATV channel selections. To delete a channel from one of these modes, select the channel you wish to delete, push the EDIT button once, then push the EDIT button once more to confirm selection.
•AUTO PROGRAM - The auto program feature will automatically detect signal and select them as view- able channels in the TV and CATV mode. Pushing the AUTO PROGRAM button once will bring up the menu. You can choose between STD, IRC, and HRC cable format by using the CHANNEL up and down arrows. Once the format has been established, push the AUTO PROGRAM button once to confirm.
Page 11