Rosen Entertainment Systems EM-1 manual Installing Your EM1, Getting Started

3 Installing Your EM1

A.Getting Started

•Locate the desired placement of components to ensure a proper fit. Make sure the monitor has enough room for desired movement.

Warning:

Excessive moisture and condensation will damage unit. Be sure your chosen location for the interface box and monitor are in a clean dry area.

•Ensure there is a wall plug within 4’ of desired Tuner module location before mounting any components.

•The Tuner module should be mounted on a flat solid surface. Do not mount on an uneven surface. Doing so will cause damage to the unit.

B.Mounting of Components

Table Top or Under Counter Mount

•Use a 1/8” standard flat screw driver to remove the base cover using the access notch shown

below. Be careful not to scar or damage cover.

Page 4

3 Installing Your EM1

EM-1 FPD

*15 ft. Interface Cable

Coaxial input Cable

VIDEO	R	L	MONITOR OUT IR	IN .ANT
	AV1			EXTERNAL
		000-0131-9306 Module Tuner 1-EM

AC power Adapter

*Interface Cable Notice:

Use the cable labeled with “Internal Speakers” to activate the Em-1 internal speakers

or

Use the cable labeled with “External Speakers” to deactivate the Em-1 internal speakers. This sce- nario would be used if external speakers were added to your EM-1 system.

Page 9