Rosen A9 Owner’s Manual
DVD TYPICAL SETUP AND CONFIGURATION
The following section explains how to customize various features of the A9’s DVD Player, including various language, display, and parental control features.
Note: Many DVD menu settings do not apply to the A9 system, since it is specifically engineered for automotive use. Changing the state of some settings can cause apparent system failure. If you have questions about the original state of any DVD setting, please see the list on page 22.
To change the settings for your A9 DVD Player:
1Press SOURCE SETUP.
2Use the navigation arrow buttons to highlight a selection.
3Press the ENTER button to confirm your selection.
Changing the Aspect Ratio Mode
This is under the GENERAL tab. The correct setting for the A9 is WIDE. Changing this setting to NORMAL/PS or NORMAL/LB will result in distorted video.
Changing the Video Output Mode
To change the video output mode, select GENERAL, and then select TV TYPE. The default is NTSC. If you want to be able to play PAL discs on your NTSC monitors, select PAL.
- - GENERAL PAGE - -
TV DISPLAY | NORMAL/PS |
OP MODE | NORMAL/LB |
ANGLE MARK | WIDE |
OSD LANG |
CAPTIONS |
SCR SAVER
MAIN PAGE
- - PREFERENCES PAGE - -
TV TYPE | MULTI |
SUBTITLE | NTSC |
AUDIO | PAL |
|
SUBTITLE
DISC MENU |
LOCALE |
PARENTAL
SETUP MENU
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
PREFERENCES
Note: The default setting “MULTI” will automatically output NTSC video from NTSC discs, and PAL video from PAL discs. NTSC is the North American standard. Sme discs do not play properly when MULTI is selected.
EXIT SETUP
If you try to perform an action that is not permitted (such as access- ing the Preferences menu while a disc is playing), the
display will use the following symbol:
The Digital Output Setting
There is a setting in the menu for a Digital Audio output. The A9 does not have a digital audio output. Leave this setting in the ANALOG mode.
Note: Enabling the Digital Audio mode disables the analog audio output used by the FM Modulator and the IR headphones, and can resemble a system audio failure.
AUDIO OUT | ANALOG |
OP MODE | SPDIF/RAW |
DUAL MONO | SPDIF/PCM |
DYNAMIC |
PRO LOGIC |
LPCM OUT
MAIN PAGE
20