MINIDISC OPERATION
■MD playback
3
1
7
H 4
1 Press the
2 Press the MD button.
3 Load a MiniDisc in the direction indicated by the arrow on the MiniDisc, with the labeled side fac- ing up.
●The total number of tracks and the total playing time on the MiniDisc will be displayed.
4 Press the 0 6 button.
●If the MD has a track name, the name will ap- pear and scroll across the display. Then, the elapsed playing time will appear.
●If the MD has no track names, the elapsed play- ing time will appear.
●When the last track has been played back, the unit will stop automatically.
2
2
H
To interrupt playback:
Press the 0 6 button.
●" 6 " will appear.
●Press the 0 6 button again to resume playback from the same point.
To stop playback:
Press the ■ button.
To remove a MiniDisc:
1
4
Press the 7 MD EJECT button.
Notes:
| Flash | |
|
|
|
|
|
|
DISC |
|
|
MEMORY |
|
|
|
| |
RANDOM | kHz REC | |
TOTAL | ||
REMAIN | MHz SLEEP | |
|
|
|
|
|
|
Disc name
(Displayed only when a disc name has been programmed)
DISC TOC |
|
TRACK |
|
MEMORY |
|
RANDOM | kHz REC |
TOTAL | |
REMAIN | MHz SLEEP |
Total number of tracks Total playing time
●If TV or radio interference occurs when using the MD, move the unit away from the TV or radio.
●Although MiniDiscs will not normally skip due to vibration, you may hear a skip in the sound if there is continuous vibration.
If the volume is turned up too high, a skip may occur depending on the contents of the MD.
If this happens, turn the volume down and the skipping should stop.
●If an error message is displayed during MD operation, see "ERROR MESSAGES" on page 47.
12