Sharp MD-M1H Recording from a CD onto a MiniDisc One-Touch Editing, To cancel the operation

Page 30

(Continued)

■Recording from a CD onto a MiniDisc (One-Touch Editing)

A CD can be recorded to a MiniDisc, starting from the first track, with a one-touch operation.

3

1

3

H

4

2

2H

1

1 Press the ON/STAND-BY button to turn the power on.

2 Press the CD button.

3 Load a compact disc and a recordable MiniDisc.

●The total number of tracks and the total playing time on the CD will be displayed.

●When a new recordable MiniDisc is loaded, it will take about 15 seconds to enter the recording stand-by mode.

4 Press the CD 0 MD EDIT button.

0

TOC

TRACK

 

TOC

REC

REC

●The compact disc loaded will be recorded in order, starting from the first track. When a MiniDisc runs out of recording space or when a compact disc has been completely recorded, the CD and the MD will stop automatically.

●Recording will begin, starting from the first track of CD.

●After recording (all of the tracks that can be recorded), the unit will stop automatically.

Notes:

●When the CD playing time is longer than the avail- able MD recording time, the recording process will not start even when the CD 0 MD EDIT but- ton is pressed.

Available total number

Available record-

of tracks counting from

ing time

CD first track for recording

 

●To record as many tracks as are available, press the CD 0 MD EDIT button again.

However, if the available recording time on the MD is less than the length of the first track on the CD, when the CD 0 MD EDIT button is pressed, the following display will appear.

Then, when the CD 0MD EDIT button is pressed again, recording will start. However, when the MD runs out of space, “DISC FULL” will be displayed and the CD and MD will stop.

To check the remaining time available for recording:

1Press the MD button.

2Load a MiniDisc.

3Press the DISPLAY button to find a time fol- lowed by hyphene.

●The total the number of tracks previously re- corded and the available time remaining will be displayed, 4 seconds later, the unit will return to the original display.

To cancel the operation:

Before pressing the CD 0 MD EDIT button, press the ■ button.

To stop recording:

Press the ■ button.

●Playback and recording will stop and the track numbers will be written to the MiniDisc.

Note:

●It is not possible to pause in the recording mode.

29

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Contents MD-M1HService Information Special NotesVolume control AccessoriesPrecautions GeneralNames of Controls and Indicators Front panelRear panel Display window Full-Range Speaker Bass Reflex Duct Speaker Wire16 17 18 19 20 21 Speaker sectionRemote control Preparation for USE Aerial connectionSpeaker connection To cancel the demonstration mode Connecting the AC power leadDemo mode To return to the demonstration modeTo change the brightness of the display Remote controlPrecautions for battery use To return to the original brightnessTo see the time display Setting the ClockTo change the time display mode To change the clock timePre-programmed equalizer VolumeSound Control Extra bass X-BASSTo interrupt playback Compact Disc OperationCD playback To stop playbackMinidisc Operation MD playbackTo remove a MiniDisc Repeat and random play Convenient CD and MD OperationApss Auto Program Search System Cue and reviewTo clear the programmed selections To cancel the ApmsApms Automatic Programmable Music Selector To check which tracks are programmedSwitching the time display Changing the display during MD playbackTime Auto tuning TuningManual tuning Radio OperationPreset tuning Preset memory scanPTY Display ModeInformation provided by RDS RT Radio TextPage To erase all of the contents of preset memory Aspm Auto Station Program MemoryTo stop the Aspm operation before it is complete To cancel the station select operation Page If you have selected the traffic programme To switch the display Presetx WTo manually recall the stations stored in memory About the Ptyi Dynamic PTY Indicator Checking the stand-by mode settingTo cancel the EON stand-by mode PtyiEON-TI About the TP and TA indicators TP indicator TA indicator MeaningDisc writing TOC RecordingDifferences from tape recordings About track numbersTo check the remaining time available for recording To cancel the operationRecording from a CD onto a MiniDisc One-Touch Editing To stop recordingTo record without using One-Touch Editing Apms recordingCD0MD Edit Recording from the built-in radio onto a MiniDisc To record the track number whilst record- ingEditing What the editing function can doType of characters used To create a disc name To erase a disc nameTo create a track name To erase a track nameName TOC Edit Enter Clear To change disc names and track namesTo add a character Example To change BET to BestWhen both tracks have a name DivideCombine Move To combine two non-contiguous tracksExample To erase tracks one at a time EraseAll Erase To erase all of the tracks at onceTimer Operation Timer playbackTimer recording To use sleep and timer playback in combi- nation Simultaneous sleep and timer op- erationTo cancel the sleep operation To use sleep and timer recording in com- binationUsing External Units Connecting external unitsHeadphones Listening to sound from an exter- nal unit Manual recordingWhat is a MINIDISC? Symptom Possible cause Remedy TroubleshootingIf a problem occurs Mini Disc System LimitationsMD recording and playback Symptom Possible causeCD Playback Radio receptionError Messages When an error message is displayed, proceed as followsExternal care MaintenanceInternal care Care of compact discsSpecifications Memo Terms of Guarantee

MD-M1H specifications

The Sharp MD-M1H is a distinctive portable MiniDisc player known for its compact size and impressive sound quality. This sleek device is a part of Sharp's efforts to consolidate high-performance audio in a user-friendly format. The MD-M1H features a robust build that is both lightweight and durable, making it an excellent choice for those on the go.

One of the key features of the MD-M1H is its advanced digital signal processing technology, which enhances the audio playback quality. This technology provides listeners with crisp highs and deep lows, allowing for an immersive listening experience. The device supports multiple sound modes, which cater to various music genres and personal preferences, ensuring that every user can find a setting that suits their taste.

With a comprehensive memory capacity, the Sharp MD-M1H allows users to store a significant amount of music. The MiniDisc format itself, which was designed to replace cassette tapes, offers superior durability and sound quality while being relatively compact. The ability to record and re-record audio allows users to customize their playlists easily. This is complemented by the device’s fast file access times, enabling quick navigation through extensive music libraries.

Another noteworthy characteristic of the MD-M1H is its long battery life, which is crucial for portable devices. With extended playback times, users can enjoy their music for hours without worrying about recharging. The option for rechargeable batteries adds convenience and sustainability to the overall user experience.

In terms of connectivity, the Sharp MD-M1H includes several audio outputs, making it compatible with a variety of headphones and audio systems. This versatility ensures that users can enjoy high-quality sound regardless of their audio equipment. The intuitive controls are designed for ease of use, allowing users to navigate through playlists, adjust volume, and switch modes seamlessly.

Overall, the Sharp MD-M1H is not just a portable music player; it's a gateway to exceptional audio experiences. Its blend of advanced technologies, user-friendly design, impressive sound quality, and portable convenience makes it a standout choice for audiophiles and casual listeners alike, keeping the spirit of the MiniDisc format alive in a digital age. Whether commuting, exercising, or simply relaxing, the MD-M1H provides an unparalleled soundtrack to life’s moments.
Top Page Image Contents