Viewing a PC screen
PC Stable Adjustment
When the screen is unstable in PC settings, or to make your PC stable by adjusting the Clock and Phase, set the PC in the following sequence:
1
2
3
Press the MENU button.
Result : The PICTURE menu is displayed.
Use the VOL , VOL buttons to move the FUNCTION menu.
Use the CH button move to TRACKING and then press the SEL button.
Result: The TRACKING menu is displayed.
4 | Use the CH or CH | buttons to select one of the | ||
| following options: |
|
|
|
| AUTO TRACKING |
|
|
|
| CLOCK |
|
|
|
| PHASE |
|
|
|
5 | To adjust the.. | Press the... |
| |
| AUTO TRACKING | SEL button. |
| |
| CLOCK | VOL | or VOL | button. |
| PHASE | VOL | or VOL | button. |
6
AUTO TRACKING:
CLOCK:
PHASE:
Automatically optimises the status of screen.
This is recommended to perform for new PC.
Adjusts the horizontal size of screen by increasing / decreasing the number of pixels.
Sets the focus of screen.
Adjusts when some noise exists or the character lines are seen overlapped.
7 Press the MENU button repeatedly until the menus disappear.
15