Bosch Power Tools DS241, DS240 specifications FCC Compliance Notice

Page 8

The Sensitivity Test Kit (supplied) may be used to check the sensitivity of the detectors during installation only. For field testing, the TK240 must be used. Each filter decreases the detector’s signal by a defined amount. When each filter is placed in front of the receiver’s optical module for at least 30 sec (5 sec for position 0 or 1), the approximate sensitivity setting of the installed detector can be determined by the detector's response as shown inFigure 19 on page 7.

NOTE: Testing these detectors will activate a fire alarm. Be sure to inform all concerned personnel before performing and testing.

8.8 FCC Compliance Notice

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in strict accordance with the manufacturer's instructions and recommendations, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:

•Re-orient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from the receiver.

•Consult the installing company or an experienced radio/TV technician for help.

The booklet, "How to Identify and Resolve Radio-TV Interference Problems,” prepared by the Federal Communications Commission (FCC) may prove helpful. This booklet is available from the U. S. Government Printing Office, Washington, DC 20402. Please specify Stock No.004-000-00345-4.

Page 8

P/N: 22066P

© 2004 Bosch

DS240/DS241 Installation Instructions

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Principle of Operation SpecificationsDescription Installation Considerations Use the correct wire gauge and lengthWire Size Length Avoid Sources of Heat and Air MovementConsider the effects of stratification in cold environments MountingDo not over-tighten the mounting screws SET-UP Sensitivity Adjustment Preliminary AlignmentFire Alarm Reset CleaningOther Information Fine Tune AlignmentPower Outage Remote Indicator Plate ConnectorSensitivity Total Pot Obscuration Setting Smoke Density/Obscuration InformationFCC Compliance Notice Troubleshooting 10.0 Installing Multiple Units Quick Start Installation Flow Chart

DS240, DS241 specifications

Bosch has long been a leader in the power tool industry, renowned for its innovation and quality. Among its impressive lineup are the Bosch Power Tools DS240 and DS241, which are designed for professionals demanding durability, precision, and performance in various applications.

The Bosch DS240 and DS241 models serve as exceptional circular saws that are packed with advanced features for optimal performance. Both tools are powered by robust motors delivering high torque, ensuring that they can cut through tough materials with ease. The DS240 boasts a 15-amp motor, providing ample power for heavy-duty operations, while the DS241 is designed for lighter, more intricate tasks without sacrificing efficiency.

One of the standout features of both models is their precision cutting capabilities. Equipped with laser guide technology, the saws allow users to achieve straight cuts with enhanced accuracy. The integrated laser helps in aligning the cut line, thus reducing the risk of error, making these tools perfect for those working on detailed projects.

Another significant characteristic of the Bosch DS240 and DS241 is their ergonomic design. Both models feature soft-grip handles that ensure comfort during prolonged use, reducing hand fatigue. The lightweight construction of the saws further enhances user maneuverability, making them ideal for overhead and tight-space applications.

In terms of safety, Bosch does not compromise. Both saws feature electronic brake systems that stop the blade almost instantly when the trigger is released, preventing accidents. Additionally, they come with safety guards that minimize exposure to cutting edges, ensuring a secure operating environment.

The dual bevel capability of the DS241 allows for versatile cutting angles, making it suitable for a variety of woodworking tasks. Conversely, the DS240 focuses on robust performance for straight cuts, appealing to users who prioritize power over versatility.

Both models incorporate advanced dust extraction systems, helping to maintain clean work areas and improve visibility during cutting tasks. This feature is particularly valued by professionals working in environments where cleanliness is crucial.

Overall, the Bosch Power Tools DS240 and DS241 deliver a perfect blend of power, precision, and safety, embodying Bosch's commitment to quality and innovation in power tools. Whether tackling complex construction projects or simple home improvements, these tools stand ready to meet the demands of their users.
Top Page Image Contents