2 Troubleshooting Procedures | 2.3 Power Supply Troubleshooting |
Procedure 2 Error Code Check
If the power supply microprocessor detects a malfunction, the DC IN icon blinks orange. The blink pattern indicates an error as shown below.
Start | Off for 2 seconds |
Error code (8 bit)
“1” |
| On for one second |
“0” |
| On for half second |
Interval between data bits | Off for half second | |
The error code begins with the least significant digit. | ||
Example: | Error code 11h (Error codes are given in hexadecimal format.) | |
Start
[CONFIDENTIAL] | TECRA R10 Maintenance Manual |
