Toshiba TECRA R10 manual 13 HDD/SSD Replacement Procedures, Removing the moving HDD/SSD

4.13 HDD/SSD 4 Replacement Procedures

Removing the moving HDD/SSD

To remove the HDD/SSD, follow the steps below and refer to Figure 4-18.

1.Disconnect the HDD/SSD FPC from the connector CN1900 on the system board.

2.Remove the HDD/SSD from the slot.

3.Disconnect the HDD/SSD FPC from the HDD/SSD connector.

HDD/SSD FPC

HDD/SSD

CN1900

Figure 4-18 Removing the HDD/SSD

Installing the HDD/SSD

To install the HDD/SSD, follow the steps below and refer to Figure 4-18.

1.Connect the HDD/SSD FPC to HDD/SSD connector.

2.Set the HDD/SSD in the slot in place.

3.Connect the HDD/SSD FPC to the connector CN1900 on the system board.

TECRA R10 Maintenance Manual (960-708) [CONFIDENTIAL] 4-33