2 Troubleshooting Procedures | 2.14 Bluetooth Troubleshooting |
Procedure 3 Replacement Check
The Bluetooth antenna, Bluetooth module, sound board and system board are connected to the circuits. Any of these components may be damaged. Refer to Chapter 4, Replacement Procedures, for instructions on how to disassemble the computer and then perform the following checks:
Check 1 The Bluetooth module may be defective or damaged. Replace the Bluetooth module with a new one following the steps in Chapter 4, Replacement Procedures. If the Bluetooth is still not functioning properly, perform Check 2.
Check 2 The Bluetooth module FPC may be defective or damaged. Replace the Bluetooth module FPC with a new one following the steps in Chapter 4, Replacement Procedures. If the Bluetooth is still not functioning properly, perform Check 3.
Check 3 The system board may be defective or damaged. Replace the system board with a new one following the steps in Chapter 4, Replacement Procedures.
[CONFIDENTIAL] | TECRA R10 Maintenance Manual |
