Toshiba TECRA R10 manual DIAGNOSTICS-HARD Disk & Floppy Disk Dump

3.24 Floppy Disk Drive Utilities 3 Tests and Diagnostics

4.DUMP program

(a)When DUMP is selected, the following message appears:

DIAGNOSTICS-HARD DISK & FLOPPY DISK DUMP : VX.XX

Drive type select (1:FDD, 2:HDD) ?

(b)Select a drive type. If 2:HDD is selected, the display will go to step (h). If 1:FDD is selected, the following message will appear:

Select drive number (1:A, 2:B) ?

(c)Select a drive number and the following message will be displayed.

Format type select (1:2DD, 3:2HD) ?

(d)If 3:2HD is selected, the following message will appear. Select a media mode.

2HD media mode (1:1.20MB, 2:1.44MB, 3:1.23MB)?

(e)The following message will appear:

Insert source disk into drive A:

Press any key when ready.

(f) Insert a source disk and press any key and the following message will appear:

——Max. address —— [Track ] = XXXX [Head ] = XX [Sector] = XX

Track number ????

(g)Set the track number, head number and sector number you want to dump. The system will access the disk and dump a list. Then the message shown in (k) will appear.

(h)The following message will appear when selecting 2:HDD in (a).

Select drive number (1:C, 2:D) ?

(i) Select a drive number and the following message will be displayed.

---Max. address ---

[LBA ] = XXXXXXXXX LBA number ????????

(j)Set the LBA number you want to dump. The system will access the disk and dump a list.

3-58 [CONFIDENTIAL] TECRA R10 Maintenance Manual (960-708)