3 Tests and Diagnostics | 3.29 LAN/Modem/Bluetooth/IEEE1394 Test Program |
3.29.2Modem test (Not Used)
For this subtest, connect the modem PCB and RJ11 connector with a harness. Use the dedicated
##################################################################
###### AC97' Modem Controller Diagnostics program #######
##################################################################
* | 1 | (ICHx) | * |
* | * | ||
* | 2 | (ICH6) | * |
* | * | ||
* |
|
| * |
******************************************************************
.... Press test
To execute Modem test, press 2 and Enter. Following message will appear:
[Modem loopback test !]
ICHx MDC Test Program with Modem Sound (Line Test)
Version X.X
* Scorpio | Modem Initialize | :OK | |
* | Digital | Loopback Test | :OK |
* | RJ11 Connector Check (LED) | :(Operator’s Check!!) |
OK is displayed when a error is detected, NG is display when a error is not detected.
NOTE: The menu displayed by your computer may be slightly different from the one shown above.
RJ11 Connection Check (LED) (Operator’s Check LED) test will be executed, and the following message will appear:
...Press Key (Y = OK , N =NG)
If the color in the LED of the connection checker is orange, press Y, otherwise, press N.
[CONFIDENTIAL] | TECRA R10 Maintenance Manual |