Toshiba TECRA R10 manual Keyboard Replacement Procedures, Removing the Keyboard

4.10 Keyboard 4 Replacement Procedures

4.10 Keyboard

Removing the Keyboard

To remove the keyboard, follow the steps below and refer to Figure 4-11 to 4-12.

CAUTION: As the keytop may fall out, when handling the keyboard always hold it by the frame and do not touch the keytop.

1.Turn over the computer and open the display.

2.Insert your fingers into the slit and remove KB HOLDER while releasing the latches.

3.Remove the following screws securing the keyboard.

• M2.0⋅4B BIND screw ⋅2

4.Lift the top edge of the keyboard and turn the keyboard face down on the palm rest portion of COVER ASSY.

KB HOLDER

M2.0x4B BIND

Slit

Keyboard

Figure 4-11 Removing the keyboard (1)

TECRA R10 Maintenance Manual (960-708) [CONFIDENTIAL] 4-23