Toshiba TECRA R10 manual Removing the Optical disk drive, Installing the Optical disk drive

4 Replacement Procedures			4.9	Optical disk drive (DVD-Super Multi drive)
3.	Remove the following screws and ODD REAR BRKT.
	•	M2.0⋅2.7C	STEP screw	⋅2
4.	Remove the following screw and ODD SIDE BRKT.
	•	M2.0⋅3C	S-THIN HEAD screw	⋅1
				Optical disk drive
ODD REAR BRKT				ODD SIDE BRKT

M2.0x2.7C STEP M2.0x3C S-THIN HEAD

Figure 4-10 Removing the Optical disk drive (2)

Installing the Optical disk drive

To install the Optical disk drive, follow the steps below and refer to Figure 4-9 to 4-10.

1.Set the ODD REAR BRKT to the optical disk drive and secure them with the following screws.

• M2.0⋅2.7C STEP screw ⋅2

2.Set the ODD SIDE BRKT to the optical disk drive and secure them with the following screw.

• M2.0⋅3C S-THIN HEAD screw ⋅1

3.Insert the ODD ASSY into the slot to connect it to the connector on the system board and secure optical disk drive assembly with the following screws.

• M2.5⋅6C FLAT HEAD screw ⋅2

CAUTION: Drive the screws in the order shown in the Figure 4-9.

4-22 [CONFIDENTIAL] TECRA R10 Maintenance Manual (960-708)