Toshiba TECRA R10 manual Replacement Procedure SD board, Installing the SD board

4 Replacement Procedure 4.20 SD board

Installing the SD board

To install the SD board, follow the steps below and refer to Figure 4-28.

1.Connect the SD BOARD FPC to the SD board

2.Secure the SD board with the following screws.

• M2.5⋅4C FLAT HEAD ⋅2

3. Connect SD BOARD FPC to the connector CN9530 on the system board.

4-50 [CONFIDENTIAL] TECRA R10 Maintenance Manual (960-708)